47 Automation Specialist jobs in Canada

At Stantec, we help deliver the critical minerals needed to power our world, from the cars we drive to the infrastructure powering our communities. And we don't just design the largest, deepest, and most technically challenging mines in the world-we do it sustainably. We're helping clients reduce energy usage, adopt clean energy sources, and implement digital solutions and automation.
Join our team of mining professionals and you'll be at the forefront of this evolving industry while building the mine of the future. You'll also build your own future, with exciting opportunities for development and advancement.
Your Opportunity
Stantec is currently searching for In-field Instrumentation Automation Specialists (Geotechnical and Hydrogeological monitoring) on a regular full-time basis, reporting out of Western Canada. This is a non-exempt position; overtime hours worked will be remunerated based on provincial employment regulations. Under the supervision of the Technical Lead, the Instrumentation Automation Specialist is responsible for completing operations maintenance, system design, estimating, procurement, assembly and programing of individual geotechnical and hydrogeologic automated stations monitoring to entire systems. You will be a focal contact for all automated and manual instrument troubleshooting from both client and internal issues. This position will work independently in the field with support from their Site Supervisor and Project Manager.
This is primarily a field position, with approximately 85% of the work being field based. Work schedules based on project specific requirements and may require rotations of 12-hour shifts (day/night), as well as travel to remote field locations. Travel costs incurred while travelling to and from the project will only be covered from approved locations (Calgary and Edmonton).
Your Key Responsibilities
- Participating in and following site-specific Health Safety Environment (HSE) policies and that the safety standard procedures are strictly adhered to with the goal of achieving zero workplace incidents and promotion of a safe work environment for all
- Participating in daily tailgate meetings
- Identifying and reporting hazards and unsafe conditions and seeking to improve safety with reference to known policies and procedures
- Documenting significant events or observations related to the job (i.e. Environmental, Hazard ID, Job Observations, etc.)
- Commissioning of telemetry enabled automated data acquisition systems for monitoring programs including integrating sensors with dataloggers and building out connectivity networks.
- Maintaining monitoring programs by troubleshooting and diagnosing issues and completing service and calibration work.
- Programming, installing and downloading information from data loggers
- Taking readings from vibrating wire piezometers, pressure transducers, standpipes, slope inclinometers, in-place inclinometers and SAAs
- Performing maintenance and troubleshooting on automated data acquisition systems
- Performing Quality Control (QC) of all readings (e.g. allow noise in slope inclinometer reading(s) to reduce before recording the reading), data entry, outputs and determine if instrument readings are of good quality or if re-reads are required
- Documentation of installation and configuration details.
- Entering, maintaining, and updating instrumentation data files and drawings as directed by the client
- Commissioning/initializing, extend, lower, aid in trenching, and otherwise modify geotechnical and/or hydrogeological instruments/wells
- Assisting and performing proper decommissioning/abandonment of geotechnical instruments and hydrogeological wells.
- Demonstrating proficiency in the competencies outlined in the applicable Core Competency Profile
- Operating light vehicles (4x4 pickups) and/or all-terrain vehicles to gain access to instruments located in potentially remote areas
- Identifying and engaging with key stakeholders to gather information and background
- Installing equipment onsite using planned approaches or field-fitting when necessary.
Your Capabilities and Credentials
- Experience with geotechnical and hydrogeological data acquisition systems such as Campbell Scientific, EWS, RST, Geokon, Ackcio, In-Situ, etc.
- Working knowledge of the Microsoft office suite of programs.
- Valid Class 5 Drivers License with current Driver's Abstract
- Highly motivated individual with good leadership and communication/networking skills
- Off-road driving experience is considered an asset
- This position requires pre-access drug and alcohol testing, functional fitness examination and criminal background check.
- Additional qualification requirements depending on project.
Education and Experience
- A minimum Post-Secondary Technical Diploma in Mechanical, Instrumentation or Electrical Engineering Technology
- Must be able to carry 20 kg 100 m over rough terrain continuously
- A minimum 2 years of relevant industry experience including mine driving is considered an asset.
- Designation with either the Association of Science and Engineering Technology Professionals of Alberta (ASET) or the Applied Science Technologists and Technicians of BC (ASTTBC) is considered an asset.
- Membership in the International Society of Automation (ISA) is considered an asset.
- Additional qualification requirements depending on project.
This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice.
Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. #FeelingEnergized
**Primary Location:** Canada | AB | Calgary
**Organization:** 1695 Mining-CA Canada-Calgary AB
**Employee Status:** Regular
**Travel:** Yes
**Schedule:** Full time
**Job Posting:** 27/08/ :08:23
**Req ID:**
#additional

At Stantec, we help deliver the critical minerals needed to power our world, from the cars we drive to the infrastructure powering our communities. And we don't just design the largest, deepest, and most technically challenging mines in the world-we do it sustainably. We're helping clients reduce energy usage, adopt clean energy sources, and implement digital solutions and automation.
Join our team of mining professionals and you'll be at the forefront of this evolving industry while building the mine of the future. You'll also build your own future, with exciting opportunities for development and advancement.
Your Opportunity
Stantec is currently searching for In-field Instrumentation Automation Specialists (Geotechnical and Hydrogeological monitoring) on a regular full-time basis, reporting out of Western Canada. This is a non-exempt position; overtime hours worked will be remunerated based on provincial employment regulations. Under the supervision of the Technical Lead, the Instrumentation Automation Specialist is responsible for completing operations maintenance, system design, estimating, procurement, assembly and programing of individual geotechnical and hydrogeologic automated stations monitoring to entire systems. You will be a focal contact for all automated and manual instrument troubleshooting from both client and internal issues. This position will work independently in the field with support from their Site Supervisor and Project Manager.
This is primarily a field position, with approximately 85% of the work being field based. Work schedules based on project specific requirements and may require rotations of 12-hour shifts (day/night), as well as travel to remote field locations. Travel costs incurred while travelling to and from the project will only be covered from approved locations (Calgary and Edmonton).
Your Key Responsibilities
- Participating in and following site-specific Health Safety Environment (HSE) policies and that the safety standard procedures are strictly adhered to with the goal of achieving zero workplace incidents and promotion of a safe work environment for all
- Participating in daily tailgate meetings
- Identifying and reporting hazards and unsafe conditions and seeking to improve safety with reference to known policies and procedures
- Documenting significant events or observations related to the job (i.e. Environmental, Hazard ID, Job Observations, etc.)
- Commissioning of telemetry enabled automated data acquisition systems for monitoring programs including integrating sensors with dataloggers and building out connectivity networks.
- Maintaining monitoring programs by troubleshooting and diagnosing issues and completing service and calibration work.
- Programming, installing and downloading information from data loggers
- Taking readings from vibrating wire piezometers, pressure transducers, standpipes, slope inclinometers, in-place inclinometers and SAAs
- Performing maintenance and troubleshooting on automated data acquisition systems
- Performing Quality Control (QC) of all readings (e.g. allow noise in slope inclinometer reading(s) to reduce before recording the reading), data entry, outputs and determine if instrument readings are of good quality or if re-reads are required
- Documentation of installation and configuration details.
- Entering, maintaining, and updating instrumentation data files and drawings as directed by the client
- Commissioning/initializing, extend, lower, aid in trenching, and otherwise modify geotechnical and/or hydrogeological instruments/wells
- Assisting and performing proper decommissioning/abandonment of geotechnical instruments and hydrogeological wells.
- Demonstrating proficiency in the competencies outlined in the applicable Core Competency Profile
- Operating light vehicles (4x4 pickups) and/or all-terrain vehicles to gain access to instruments located in potentially remote areas
- Identifying and engaging with key stakeholders to gather information and background
- Installing equipment onsite using planned approaches or field-fitting when necessary.
Your Capabilities and Credentials
- Experience with geotechnical and hydrogeological data acquisition systems such as Campbell Scientific, EWS, RST, Geokon, Ackcio, In-Situ, etc.
- Working knowledge of the Microsoft office suite of programs.
- Valid Class 5 Drivers License with current Driver's Abstract
- Highly motivated individual with good leadership and communication/networking skills
- Off-road driving experience is considered an asset
- This position requires pre-access drug and alcohol testing, functional fitness examination and criminal background check.
- Additional qualification requirements depending on project.
Education and Experience
- A minimum Post-Secondary Technical Diploma in Mechanical, Instrumentation or Electrical Engineering Technology
- Must be able to carry 20 kg 100 m over rough terrain continuously
- A minimum 2 years of relevant industry experience including mine driving is considered an asset.
- Designation with either the Association of Science and Engineering Technology Professionals of Alberta (ASET) or the Applied Science Technologists and Technicians of BC (ASTTBC) is considered an asset.
- Membership in the International Society of Automation (ISA) is considered an asset.
- Additional qualification requirements depending on project.
This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice.
Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. #FeelingEnergized
**Primary Location:** Canada | AB | Calgary
**Organization:** 1695 Mining-CA Canada-Calgary AB
**Employee Status:** Regular
**Travel:** Yes
**Schedule:** Full time
**Job Posting:** 27/08/ :08:23
**Req ID:**
#additional

At Stantec, we help deliver the critical minerals needed to power our world, from the cars we drive to the infrastructure powering our communities. And we don't just design the largest, deepest, and most technically challenging mines in the world-we do it sustainably. We're helping clients reduce energy usage, adopt clean energy sources, and implement digital solutions and automation.
Join our team of mining professionals and you'll be at the forefront of this evolving industry while building the mine of the future. You'll also build your own future, with exciting opportunities for development and advancement.
Your Opportunity
Stantec is currently searching for In-field Instrumentation Automation Specialists (Geotechnical and Hydrogeological monitoring) on a regular full-time basis, reporting out of Western Canada. This is a non-exempt position; overtime hours worked will be remunerated based on provincial employment regulations. Under the supervision of the Technical Lead, the Instrumentation Automation Specialist is responsible for completing operations maintenance, system design, estimating, procurement, assembly and programing of individual geotechnical and hydrogeologic automated stations monitoring to entire systems. You will be a focal contact for all automated and manual instrument troubleshooting from both client and internal issues. This position will work independently in the field with support from their Site Supervisor and Project Manager.
This is primarily a field position, with approximately 85% of the work being field based. Work schedules based on project specific requirements and may require rotations of 12-hour shifts (day/night), as well as travel to remote field locations. Travel costs incurred while travelling to and from the project will only be covered from approved locations (Calgary and Edmonton).
Your Key Responsibilities
- Participating in and following site-specific Health Safety Environment (HSE) policies and that the safety standard procedures are strictly adhered to with the goal of achieving zero workplace incidents and promotion of a safe work environment for all
- Participating in daily tailgate meetings
- Identifying and reporting hazards and unsafe conditions and seeking to improve safety with reference to known policies and procedures
- Documenting significant events or observations related to the job (i.e. Environmental, Hazard ID, Job Observations, etc.)
- Commissioning of telemetry enabled automated data acquisition systems for monitoring programs including integrating sensors with dataloggers and building out connectivity networks.
- Maintaining monitoring programs by troubleshooting and diagnosing issues and completing service and calibration work.
- Programming, installing and downloading information from data loggers
- Taking readings from vibrating wire piezometers, pressure transducers, standpipes, slope inclinometers, in-place inclinometers and SAAs
- Performing maintenance and troubleshooting on automated data acquisition systems
- Performing Quality Control (QC) of all readings (e.g. allow noise in slope inclinometer reading(s) to reduce before recording the reading), data entry, outputs and determine if instrument readings are of good quality or if re-reads are required
- Documentation of installation and configuration details.
- Entering, maintaining, and updating instrumentation data files and drawings as directed by the client
- Commissioning/initializing, extend, lower, aid in trenching, and otherwise modify geotechnical and/or hydrogeological instruments/wells
- Assisting and performing proper decommissioning/abandonment of geotechnical instruments and hydrogeological wells.
- Demonstrating proficiency in the competencies outlined in the applicable Core Competency Profile
- Operating light vehicles (4x4 pickups) and/or all-terrain vehicles to gain access to instruments located in potentially remote areas
- Identifying and engaging with key stakeholders to gather information and background
- Installing equipment onsite using planned approaches or field-fitting when necessary.
Your Capabilities and Credentials
- Experience with geotechnical and hydrogeological data acquisition systems such as Campbell Scientific, EWS, RST, Geokon, Ackcio, In-Situ, etc.
- Working knowledge of the Microsoft office suite of programs.
- Valid Class 5 Drivers License with current Driver's Abstract
- Highly motivated individual with good leadership and communication/networking skills
- Off-road driving experience is considered an asset
- This position requires pre-access drug and alcohol testing, functional fitness examination and criminal background check.
- Additional qualification requirements depending on project.
Education and Experience
- A minimum Post-Secondary Technical Diploma in Mechanical, Instrumentation or Electrical Engineering Technology
- Must be able to carry 20 kg 100 m over rough terrain continuously
- A minimum 2 years of relevant industry experience including mine driving is considered an asset.
- Designation with either the Association of Science and Engineering Technology Professionals of Alberta (ASET) or the Applied Science Technologists and Technicians of BC (ASTTBC) is considered an asset.
- Membership in the International Society of Automation (ISA) is considered an asset.
- Additional qualification requirements depending on project.
This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice.
Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. #FeelingEnergized
**Primary Location:** Canada | AB | Calgary
**Organization:** 1695 Mining-CA Canada-Calgary AB
**Employee Status:** Regular
**Travel:** Yes
**Schedule:** Full time
**Job Posting:** 27/08/ :08:23
**Req ID:**
#additional

At Stantec, we help deliver the critical minerals needed to power our world, from the cars we drive to the infrastructure powering our communities. And we don't just design the largest, deepest, and most technically challenging mines in the world-we do it sustainably. We're helping clients reduce energy usage, adopt clean energy sources, and implement digital solutions and automation.
Join our team of mining professionals and you'll be at the forefront of this evolving industry while building the mine of the future. You'll also build your own future, with exciting opportunities for development and advancement.
Your Opportunity
Stantec is currently searching for In-field Instrumentation Automation Specialists (Geotechnical and Hydrogeological monitoring) on a regular full-time basis, reporting out of Western Canada. This is a non-exempt position; overtime hours worked will be remunerated based on provincial employment regulations. Under the supervision of the Technical Lead, the Instrumentation Automation Specialist is responsible for completing operations maintenance, system design, estimating, procurement, assembly and programing of individual geotechnical and hydrogeologic automated stations monitoring to entire systems. You will be a focal contact for all automated and manual instrument troubleshooting from both client and internal issues. This position will work independently in the field with support from their Site Supervisor and Project Manager.
This is primarily a field position, with approximately 85% of the work being field based. Work schedules based on project specific requirements and may require rotations of 12-hour shifts (day/night), as well as travel to remote field locations. Travel costs incurred while travelling to and from the project will only be covered from approved locations (Calgary and Edmonton).
Your Key Responsibilities
- Participating in and following site-specific Health Safety Environment (HSE) policies and that the safety standard procedures are strictly adhered to with the goal of achieving zero workplace incidents and promotion of a safe work environment for all
- Participating in daily tailgate meetings
- Identifying and reporting hazards and unsafe conditions and seeking to improve safety with reference to known policies and procedures
- Documenting significant events or observations related to the job (i.e. Environmental, Hazard ID, Job Observations, etc.)
- Commissioning of telemetry enabled automated data acquisition systems for monitoring programs including integrating sensors with dataloggers and building out connectivity networks.
- Maintaining monitoring programs by troubleshooting and diagnosing issues and completing service and calibration work.
- Programming, installing and downloading information from data loggers
- Taking readings from vibrating wire piezometers, pressure transducers, standpipes, slope inclinometers, in-place inclinometers and SAAs
- Performing maintenance and troubleshooting on automated data acquisition systems
- Performing Quality Control (QC) of all readings (e.g. allow noise in slope inclinometer reading(s) to reduce before recording the reading), data entry, outputs and determine if instrument readings are of good quality or if re-reads are required
- Documentation of installation and configuration details.
- Entering, maintaining, and updating instrumentation data files and drawings as directed by the client
- Commissioning/initializing, extend, lower, aid in trenching, and otherwise modify geotechnical and/or hydrogeological instruments/wells
- Assisting and performing proper decommissioning/abandonment of geotechnical instruments and hydrogeological wells.
- Demonstrating proficiency in the competencies outlined in the applicable Core Competency Profile
- Operating light vehicles (4x4 pickups) and/or all-terrain vehicles to gain access to instruments located in potentially remote areas
- Identifying and engaging with key stakeholders to gather information and background
- Installing equipment onsite using planned approaches or field-fitting when necessary.
Your Capabilities and Credentials
- Experience with geotechnical and hydrogeological data acquisition systems such as Campbell Scientific, EWS, RST, Geokon, Ackcio, In-Situ, etc.
- Working knowledge of the Microsoft office suite of programs.
- Valid Class 5 Drivers License with current Driver's Abstract
- Highly motivated individual with good leadership and communication/networking skills
- Off-road driving experience is considered an asset
- This position requires pre-access drug and alcohol testing, functional fitness examination and criminal background check.
- Additional qualification requirements depending on project.
Education and Experience
- A minimum Post-Secondary Technical Diploma in Mechanical, Instrumentation or Electrical Engineering Technology
- Must be able to carry 20 kg 100 m over rough terrain continuously
- A minimum 2 years of relevant industry experience including mine driving is considered an asset.
- Designation with either the Association of Science and Engineering Technology Professionals of Alberta (ASET) or the Applied Science Technologists and Technicians of BC (ASTTBC) is considered an asset.
- Membership in the International Society of Automation (ISA) is considered an asset.
- Additional qualification requirements depending on project.
This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice.
Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. #FeelingEnergized
**Primary Location:** Canada | AB | Calgary
**Organization:** 1695 Mining-CA Canada-Calgary AB
**Employee Status:** Regular
**Travel:** Yes
**Schedule:** Full time
**Job Posting:** 27/08/ :08:23
**Req ID:**
#additional

At Stantec, we help deliver the critical minerals needed to power our world, from the cars we drive to the infrastructure powering our communities. And we don't just design the largest, deepest, and most technically challenging mines in the world-we do it sustainably. We're helping clients reduce energy usage, adopt clean energy sources, and implement digital solutions and automation.
Join our team of mining professionals and you'll be at the forefront of this evolving industry while building the mine of the future. You'll also build your own future, with exciting opportunities for development and advancement.
Your Opportunity
Stantec is currently searching for In-field Instrumentation Automation Specialists (Geotechnical and Hydrogeological monitoring) on a regular full-time basis, reporting out of Western Canada. This is a non-exempt position; overtime hours worked will be remunerated based on provincial employment regulations. Under the supervision of the Technical Lead, the Instrumentation Automation Specialist is responsible for completing operations maintenance, system design, estimating, procurement, assembly and programing of individual geotechnical and hydrogeologic automated stations monitoring to entire systems. You will be a focal contact for all automated and manual instrument troubleshooting from both client and internal issues. This position will work independently in the field with support from their Site Supervisor and Project Manager.
This is primarily a field position, with approximately 85% of the work being field based. Work schedules based on project specific requirements and may require rotations of 12-hour shifts (day/night), as well as travel to remote field locations. Travel costs incurred while travelling to and from the project will only be covered from approved locations (Calgary and Edmonton).
Your Key Responsibilities
- Participating in and following site-specific Health Safety Environment (HSE) policies and that the safety standard procedures are strictly adhered to with the goal of achieving zero workplace incidents and promotion of a safe work environment for all
- Participating in daily tailgate meetings
- Identifying and reporting hazards and unsafe conditions and seeking to improve safety with reference to known policies and procedures
- Documenting significant events or observations related to the job (i.e. Environmental, Hazard ID, Job Observations, etc.)
- Commissioning of telemetry enabled automated data acquisition systems for monitoring programs including integrating sensors with dataloggers and building out connectivity networks.
- Maintaining monitoring programs by troubleshooting and diagnosing issues and completing service and calibration work.
- Programming, installing and downloading information from data loggers
- Taking readings from vibrating wire piezometers, pressure transducers, standpipes, slope inclinometers, in-place inclinometers and SAAs
- Performing maintenance and troubleshooting on automated data acquisition systems
- Performing Quality Control (QC) of all readings (e.g. allow noise in slope inclinometer reading(s) to reduce before recording the reading), data entry, outputs and determine if instrument readings are of good quality or if re-reads are required
- Documentation of installation and configuration details.
- Entering, maintaining, and updating instrumentation data files and drawings as directed by the client
- Commissioning/initializing, extend, lower, aid in trenching, and otherwise modify geotechnical and/or hydrogeological instruments/wells
- Assisting and performing proper decommissioning/abandonment of geotechnical instruments and hydrogeological wells.
- Demonstrating proficiency in the competencies outlined in the applicable Core Competency Profile
- Operating light vehicles (4x4 pickups) and/or all-terrain vehicles to gain access to instruments located in potentially remote areas
- Identifying and engaging with key stakeholders to gather information and background
- Installing equipment onsite using planned approaches or field-fitting when necessary.
Your Capabilities and Credentials
- Experience with geotechnical and hydrogeological data acquisition systems such as Campbell Scientific, EWS, RST, Geokon, Ackcio, In-Situ, etc.
- Working knowledge of the Microsoft office suite of programs.
- Valid Class 5 Drivers License with current Driver's Abstract
- Highly motivated individual with good leadership and communication/networking skills
- Off-road driving experience is considered an asset
- This position requires pre-access drug and alcohol testing, functional fitness examination and criminal background check.
- Additional qualification requirements depending on project.
Education and Experience
- A minimum Post-Secondary Technical Diploma in Mechanical, Instrumentation or Electrical Engineering Technology
- Must be able to carry 20 kg 100 m over rough terrain continuously
- A minimum 2 years of relevant industry experience including mine driving is considered an asset.
- Designation with either the Association of Science and Engineering Technology Professionals of Alberta (ASET) or the Applied Science Technologists and Technicians of BC (ASTTBC) is considered an asset.
- Membership in the International Society of Automation (ISA) is considered an asset.
- Additional qualification requirements depending on project.
This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice.
Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. #FeelingEnergized
**Primary Location:** Canada | AB | Calgary
**Organization:** 1695 Mining-CA Canada-Calgary AB
**Employee Status:** Regular
**Travel:** Yes
**Schedule:** Full time
**Job Posting:** 27/08/ :08:23
**Req ID:**

Job Description

Job Description

Westburne, a division of Rexel Canada Electrical Inc., is a leader in electrical product distribution participating in the commercial, residential, industrial and institutional markets across Canada. Westburne is currently seeking an Automation Sales Specialist responsible for Automation Services to support the geographical territory of British Columbia based out of Prince George, BC. The Services Sales Specialist is a highly trained individual who represents the Rockwell Automation (Allen-Bradley) and Westburne’s portfolio of automation services:  Training, Remanufacturing, Field Labour, Technical Support Contracts and Annual Re-Occurring Revenue Contracts.  The successful candidate will support both internal and external customers with in-depth technical and application knowledge while being responsible for the sales performance of their product discipline within the assigned territory.  The Services Sales Specialist is a dynamic role with sales, technical and marketing responsibilities including, but not limited to: Sales Responsibilities * Prepare and execute an annual strategic business and growth plan for sales development. * Actively manage an opportunity funnel that is appropriate to achieving sales objectives. * Actively pursue and develop new business opportunities. * Comfortable leading very complex initiatives providing value to stakeholders. * Ability to uncover customer needs that yield desired outcomes by designing and implementing a Lifecycle Services journey. * Support Westburne and Rockwell Automation sales representatives with account planning and execution. Technical Responsibilities * Act as a pre-sale consultant to provide technical solutions to customers. * Facilitate post-sale technical support programs to build competency and confidence of customers. * Conduct presentations and product updates. * Serve as domain expert around Services business and continuously build competency. * Attend supplier partner training (Canada/US) to maintain a high level of specialized product and application knowledge. Marketing Responsibilities * Understand market conditions and competitive forces, analyze market share and identify growth opportunities. * Develop and execute commercial activities as a component of an annual strategic business plan.  Product launches, Seminars, promotional programs, etc. * Implement strategies to address competition and expand market penetration using available marketing tools. QUALIFICATIONS Education:    Electrical/Electronic/Automation Technology diploma or degree from a recognized institution. Experience:    Minimum of 2+ years previous experience in automation or technical product sales/support. Desired Skills: * An understanding of sales principles such as Strategic selling, Customer Centric Selling, Conceptual Selling, etc. * Proactive, engaging, self-motivated and results oriented. * Time management, organizational and problem solving proficiency. * Strong written/verbal business communication & presentation skills. * Experience with Microsoft Office suite. * Technical understanding of industrial automation systems and manufacturing business drivers. **Valid driver’s licence and passport will be required for this position. What We Offer * Our employees enjoy a positive work-life balance while thriving in an environment that is ever-changing and motivated by new and exciting challenges. * We offer a technically challenging position, supported by a peer group of Automation subject matter experts. * We offer competitive compensation, a series of benefit options and pension packages, and the opportunity for success and growth across the organization. * Westburne provides equal employment opportunities for all applicants. We encourage everyone to apply. What Is Next * If this is the right position for you, click apply. * We thank all candidates for their interest, however, only candidates selected for interviews will be contacted. * If you require any accommodation in the application process, please contact us with the “Need Help” button in Fitzii.

As an Automation Specialist within our Calgary office, you will excel in a multi-faceted role supporting our clients in the Automation Solutions space. You will be pivotal in solving our customers’ business problems using your creativity and technical expertise to create, design and implement innovative control system solutions. Ultimately, you will provide superior client experiences partnering with your internal team to cohesively deliver a vision, energy, and intensity that exceeds client expectations.

What would a typical day look like?

• Technically, Automation Specialists will work on various stages of automation and control projects including PLC programming, HMI design, SCADA system design, electrical design and troubleshooting/testing/debugging, controls documents
• Participate in planning sessions that will identify industry business drivers and trends that will serve as the basis for developing key offerings to our clients
• Attend client field service and emergency calls

What qualifies you for this opportunity?

• Post-secondary degree/diploma in Engineering or Engineering Technology, or equivalent qualifications preferred.
• Ideally 5 years’ experience with PLC Programming and HMI/SCADA Design primarily in Rockwell and Schneider
• Experience commissioning at customer sites including troubleshooting, testing and debugging of systems
• A proven self-starter with a positive attitude, who is motivated by solving complex challenges
• A strong client-focused approach, dedicated to providing exceptional client experiences to our internal and external customers
• Excellent verbal and written communication skills
• Motivated & passionate about working with people and overcoming challenges through collaboration and a win-win paradigm
• An ability to travel; Automation Specialists at JMP should have the ability to travel within the US and Canada

Physical Demands:

• While performing the duties of this position, the employee is regularly required to stand, walk, sit, use hands to feel objects, reach with hands and arms, stoop, kneel, talk and hear.
• Specific vision abilities required for the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

JMP Solutions (a Convergix Company)

Founded in 1987, JMP is an automation systems integrator offering solutions to diverse industrial and consumer end markets. It designs, engineers, and integrates hardware and software to automate its customers’ manufacturing and production facilities. Headquartered in London, Ontario, with an established North American footprint consisting of 17 office locations across the U.S. and Canada, the Company’s multi-geographic branch model provides it with a strategic advantage over smaller, sub-regional competitors, allowing it to provide targeted, local support while also growing with its blue-chip customer base across geographies and applications. We are certified as a “Great Place to Work” in both Canada and US. We have also been awarded one of the “Top 50 Best Workplaces Canada” nine (9) times, including Best Workplaces for Inclusion, for Women and Professional Services 2021 and 2022.

What does JMP Offer You?

Here at JMP, we offer a very generous compensation and benefits package including:

• Health
• Dental coverage
• RRSP Matching / 401K Matching
• and more!

ABOUT CONVERGIX AUTOMATION SOLUTIONS

Convergix Automation Solutions is a Global Systems Integrator specializing in custom automated manufacturing systems including, robotics, controls, material handling, information and software systems, process automation in a variety of manufacturing industries. With over 900 employees, 25+ Locations worldwide and $300M in Sales, Convergix is growing organically as well through acquisition to become a leading $1B Automation Integration global partner. We are a single source automation solutions provider that leverages the geography, technology, industry expertise and capacity of the entire Convergix portfolio across the entire value chain for our customers in a diverse set of industries.

Learn more about us:

What does CONVERGIX value?

Our values are our foundational concepts on which we build CONVERGIX; we adhere to these no matter what mountain we climb.

• Integrity - Respect, Transparency, Commitment
• Excellence - Continuous Improvement, Innovation, Collaboration, Communication
• Passion - Momentum, Sense of Urgency, Growth, Success, Velocity

We thank all candidates for their interest, however only those considered for an interview will be contacted.

JMP Solutions has an accommodation program in place that provides reasonable accommodations for employees with disabilities. If you require a specific accommodation because of a disability or a medical need, please contact Human Resources.

As an Automation Specialist within our Calgary office, you will excel in a multi-faceted role supporting our clients in the Automation Solutions space. You will be pivotal in solving our customers’ business problems using your creativity and technical expertise to create, design and implement innovative control system solutions. Ultimately, you will provide superior client experiences partnering with your internal team to cohesively deliver a vision, energy, and intensity that exceeds client expectations.

What would a typical day look like?

• Technically, Automation Specialists will work on various stages of automation and control projects including PLC programming, HMI design, SCADA system design, electrical design and troubleshooting/testing/debugging, controls documents
• Participate in planning sessions that will identify industry business drivers and trends that will serve as the basis for developing key offerings to our clients
• Attend client field service and emergency calls

What qualifies you for this opportunity?

• Post-secondary degree/diploma in Engineering or Engineering Technology, or equivalent qualifications preferred.
• Ideally 5 years’ experience with PLC Programming and HMI/SCADA Design primarily in Rockwell and Schneider
• Experience commissioning at customer sites including troubleshooting, testing and debugging of systems
• A proven self-starter with a positive attitude, who is motivated by solving complex challenges
• A strong client-focused approach, dedicated to providing exceptional client experiences to our internal and external customers
• Excellent verbal and written communication skills
• Motivated & passionate about working with people and overcoming challenges through collaboration and a win-win paradigm
• An ability to travel; Automation Specialists at JMP should have the ability to travel within the US and Canada

Physical Demands:

• While performing the duties of this position, the employee is regularly required to stand, walk, sit, use hands to feel objects, reach with hands and arms, stoop, kneel, talk and hear.
• Specific vision abilities required for the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

JMP Solutions (a Convergix Company)

Founded in 1987, JMP is an automation systems integrator offering solutions to diverse industrial and consumer end markets. It designs, engineers, and integrates hardware and software to automate its customers’ manufacturing and production facilities. Headquartered in London, Ontario, with an established North American footprint consisting of 17 office locations across the U.S. and Canada, the Company’s multi-geographic branch model provides it with a strategic advantage over smaller, sub-regional competitors, allowing it to provide targeted, local support while also growing with its blue-chip customer base across geographies and applications. We are certified as a “Great Place to Work” in both Canada and US. We have also been awarded one of the “Top 50 Best Workplaces Canada” nine (9) times, including Best Workplaces for Inclusion, for Women and Professional Services 2021 and 2022.

What does JMP Offer You?

Here at JMP, we offer a very generous compensation and benefits package including:

• Health
• Dental coverage
• RRSP Matching / 401K Matching
• and more!

ABOUT CONVERGIX AUTOMATION SOLUTIONS

Convergix Automation Solutions is a Global Systems Integrator specializing in custom automated manufacturing systems including, robotics, controls, material handling, information and software systems, process automation in a variety of manufacturing industries. With over 900 employees, 25+ Locations worldwide and $300M in Sales, Convergix is growing organically as well through acquisition to become a leading $1B Automation Integration global partner. We are a single source automation solutions provider that leverages the geography, technology, industry expertise and capacity of the entire Convergix portfolio across the entire value chain for our customers in a diverse set of industries.

Learn more about us:

What does CONVERGIX value?

Our values are our foundational concepts on which we build CONVERGIX; we adhere to these no matter what mountain we climb.

• Integrity - Respect, Transparency, Commitment
• Excellence - Continuous Improvement, Innovation, Collaboration, Communication
• Passion - Momentum, Sense of Urgency, Growth, Success, Velocity

We thank all candidates for their interest, however only those considered for an interview will be contacted.

JMP Solutions has an accommodation program in place that provides reasonable accommodations for employees with disabilities. If you require a specific accommodation because of a disability or a medical need, please contact Human Resources.

As an Automation Specialist within our Calgary office, you will excel in a multi-faceted role supporting our clients in the Automation Solutions space. You will be pivotal in solving our customers’ business problems using your creativity and technical expertise to create, design and implement innovative control system solutions. Ultimately, you will provide superior client experiences partnering with your internal team to cohesively deliver a vision, energy, and intensity that exceeds client expectations.

What would a typical day look like?

• Technically, Automation Specialists will work on various stages of automation and control projects including PLC programming, HMI design, SCADA system design, electrical design and troubleshooting/testing/debugging, controls documents
• Participate in planning sessions that will identify industry business drivers and trends that will serve as the basis for developing key offerings to our clients
• Attend client field service and emergency calls

What qualifies you for this opportunity?

• Post-secondary degree/diploma in Engineering or Engineering Technology, or equivalent qualifications preferred.
• Ideally 5 years’ experience with PLC Programming and HMI/SCADA Design primarily in Rockwell and Schneider
• Experience commissioning at customer sites including troubleshooting, testing and debugging of systems
• A proven self-starter with a positive attitude, who is motivated by solving complex challenges
• A strong client-focused approach, dedicated to providing exceptional client experiences to our internal and external customers
• Excellent verbal and written communication skills
• Motivated & passionate about working with people and overcoming challenges through collaboration and a win-win paradigm
• An ability to travel; Automation Specialists at JMP should have the ability to travel within the US and Canada

Physical Demands:

• While performing the duties of this position, the employee is regularly required to stand, walk, sit, use hands to feel objects, reach with hands and arms, stoop, kneel, talk and hear.
• Specific vision abilities required for the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

JMP Solutions (a Convergix Company)

Founded in 1987, JMP is an automation systems integrator offering solutions to diverse industrial and consumer end markets. It designs, engineers, and integrates hardware and software to automate its customers’ manufacturing and production facilities. Headquartered in London, Ontario, with an established North American footprint consisting of 17 office locations across the U.S. and Canada, the Company’s multi-geographic branch model provides it with a strategic advantage over smaller, sub-regional competitors, allowing it to provide targeted, local support while also growing with its blue-chip customer base across geographies and applications. We are certified as a “Great Place to Work” in both Canada and US. We have also been awarded one of the “Top 50 Best Workplaces Canada” nine (9) times, including Best Workplaces for Inclusion, for Women and Professional Services 2021 and 2022.

What does JMP Offer You?

Here at JMP, we offer a very generous compensation and benefits package including:

• Health
• Dental coverage
• RRSP Matching / 401K Matching
• and more!

ABOUT CONVERGIX AUTOMATION SOLUTIONS

Convergix Automation Solutions is a Global Systems Integrator specializing in custom automated manufacturing systems including, robotics, controls, material handling, information and software systems, process automation in a variety of manufacturing industries. With over 900 employees, 25+ Locations worldwide and $300M in Sales, Convergix is growing organically as well through acquisition to become a leading $1B Automation Integration global partner. We are a single source automation solutions provider that leverages the geography, technology, industry expertise and capacity of the entire Convergix portfolio across the entire value chain for our customers in a diverse set of industries.

Learn more about us:

What does CONVERGIX value?

Our values are our foundational concepts on which we build CONVERGIX; we adhere to these no matter what mountain we climb.

• Integrity - Respect, Transparency, Commitment
• Excellence - Continuous Improvement, Innovation, Collaboration, Communication
• Passion - Momentum, Sense of Urgency, Growth, Success, Velocity

We thank all candidates for their interest, however only those considered for an interview will be contacted.

JMP Solutions has an accommodation program in place that provides reasonable accommodations for employees with disabilities. If you require a specific accommodation because of a disability or a medical need, please contact Human Resources.