96 Electrical Engineering jobs in Canada

Technical Director of Electrical Engineering, Substation Join to apply for the Technical Director of Electrical Engineering, Substation role at Pond & Company
Technical Director of Electrical Engineering, Substation
Join to apply for the Technical Director of Electrical Engineering, Substation role at Pond & Company
Get AI-powered advice on this job and more exclusive features.
Join Pond & Company and be part of the team that’s redefining the future of Architectural, Engineering, Planning, Construction Management, and Environmental projects!
We are searching for an experienced Technical Director of Electrical Engineering, focusing on the management of substation design and will be based in either one of the following Pond offices: The Woodlands, TX; The successful candidate would be mentoring a dynamic team of Power Industry professionals while supporting/leading a range of multidisciplinary projects. Typical projects could include detailed design of substation physical layouts, lightning protection, conduit and cable plans, grounding analysis and design, generating single and three-line schematic diagrams, lighting design, specifying equipment and materials, and coordination with studies, protection and control, structural, civil, transmission line, and drafting disciplines. Other duties could include overseeing various three phase and single phase voltage, ampacity, and power calculations, arc flash analyses, performing site visits for data gathering, writing material procurement and construction specifications, evaluating contractor bids, bus and insulator strength calculations, insulation coordination studies, reviewing shop drawings, researching equipment, developing voltage drop, conduit fill and battery sizing calculations, generating engineering fee estimates, providing field support during construction, and preparing reports. The successful candidate would also interface with clients and support proposal development. Projects will span across multiple markets and geographies affording opportunities for broadening knowledge and deepening skill sets related to design projects. BS in Electrical Engineering from an accredited university
~Proficient with relevant software such as AutoCAD Electrical, CYME, ETAP, SKM
~ Expertise in substation integration for distributed energy resources, renewable energy, and microgrids
~ Experience interacting with clients, supporting marketing proposals, and presenting at industry conferences
~ Proficient in creating equipment data sheets, evaluating contractor bids, and reviewing shop drawings or researching equipment
~ Ability to generate engineering fee estimates, provide field support during construction, and prepare comprehensive reports
~ Ability to work well within a team environment, positive attitude, multi-task, and self-motivated to produce high quality work
~ Pond is an award-winning, full-service architecture, engineering, planning, construction management, and environmental services firm providing professional solutions to clients throughout the U.Pond’s staff of 800+ professionals provide a deep bench strength of experience and capabilities to offer customized solutions that help clients manage projects from concept to completion – and everything in between – with confidence and clarity. Pond is currently ranked as the 80th largest engineering and design firm by ENR, Atlanta’s #1 engineering firm by Atlanta Business Chronicle, and has been recognized as an Employer of the Year by Georgia ACEC and a Best Place to Work for Working Parents.
Starting base pay may vary depending on these factors. Please see the hiring range associated with this posting for more information.
Additional cash incentives may be provided as part of the compensation package, in addition to a range of medical, financial and/or other benefits dependent on position offered. Pre-employment background checks will be conducted on all candidates that are offered a position at Pond in compliance with program policy as well as state and federal regulations. We are an equal opportunity and affirmative action employer that recognizes the value of diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, age, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state and local laws in jurisdictions where we operate. If you need assistance or an accommodation due to a disability, you may contact us at (email protected) .
For more information on our services, clientele, or employment opportunities, visit our website at
Employment type Full-time

Job function Information Technology

Get notified about new Technical Director jobs in Oklahoma City Metropolitan Area.
First Level Electrical Design and Installation Manager
We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#

Arup’s purpose, shared values, and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.

We are looking for an Electrical Engineering Leader to join our Toronto office. You'd be joining our existing teams who work on a range of complex and large scale projects types like Rail, Data Centers, High Education, and Laboratories. This leadership position will help us continue to grow and diversify the markets / project types our team support through deepening current client relationships and cultivating new relationships.

THE OPPORTUNITY

• Lead the development and execution of business development strategies to win new projects and contracts and diversify services provided to clients
• Develop relationships with new key clients and collaborators
• Act as a project manager to monitor project progress to identify and address potential issues or risks
• Provide coaching and mentoring to the current and future team that supports career development and skills building

Is this role right for you?

• Bachelor’s degree in electrical or architectural engineering
• Minimum 15 years experience designing electrical systems for range of industrial, commercial, educational, healthcare, laboratories and / or transit project experience
• P.Eng is required or ability to obtain within 6 months of joining the firm
• Experience leading multi-disciplinary projects as a project manager
• Experience with developing proposals and attending pitch meeting with clients to secure projects

Please note that all applicants must apply directly via the job portal.If this role is not quite what you are looking for but you are interested in other opportunities for a future with purpose, please sign up to our iswhere you will be kept up to date with roles suitable for you to shape a better world.

What we offer you

At Arup, we care about each member’s success, so we can grow together.

Guided by our values, we provide an attractive total reward package that recognizes the contribution of each of our members to our shared success. As well as competitive, fair and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do.

We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling members to share in the results of our collective efforts.

Benefits that Work - At Arup, we have a comprehensive and valuable benefits program that works for our employees and their families. These are 100% paid for by Arup except for optional life insurance. These benefits provide health and welfare security for you as well as paid time off for rest and renewal. Our Global Profit Share Plan (paid bi-annually) provides an opportunity for you to share in the success of the Firm. As a valued employee of Arup, you can also choose to participate in our GRRSP 5% company match to help you save for your future.

Hiring Range - The good faith base salary hiring range for this job if performed in Toronto is $170,000 to $210,000 per year. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of Toronto will differ.

Flexible Working - We believe that flexible arrangements create a more inclusive way of working that supports our diversity and the wellbeing of our people. Options for alternative schedules and the ability to work outside of the office for a portion of your workweek are available.

Create a job alert for this search

Associate Engineering • Toronto, Ontario, Canada

Technical Director of Electrical Engineering, Substation

Join to apply for the Technical Director of Electrical Engineering, Substation role at Pond & Company

Technical Director of Electrical Engineering, Substation

1 day ago Be among the first 25 applicants

Join to apply for the Technical Director of Electrical Engineering, Substation role at Pond & Company

Get AI-powered advice on this job and more exclusive features.

This range is provided by Pond & Company. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more.

Base pay range

$137,500.00/yr - $181,700.00/yr

Ready to turn your ambition into achievement? Join Pond & Company and be part of the team that’s redefining the future of Architectural, Engineering, Planning, Construction Management, and Environmental projects!
About The Position
We are searching for an experienced Technical Director of Electrical Engineering, focusing on the management of substation design and will be based in either one of the following Pond offices: Atlanta, GA; Peachtree Corners, GA; Tampa, FL; The Woodlands, TX; Denver, CO. The successful candidate would be mentoring a dynamic team of Power Industry professionals while supporting/leading a range of multidisciplinary projects. Typical projects could include detailed design of substation physical layouts, lightning protection, conduit and cable plans, grounding analysis and design, generating single and three-line schematic diagrams, lighting design, specifying equipment and materials, and coordination with studies, protection and control, structural, civil, transmission line, and drafting disciplines. Other duties could include overseeing various three phase and single phase voltage, ampacity, and power calculations, arc flash analyses, performing site visits for data gathering, writing material procurement and construction specifications, evaluating contractor bids, bus and insulator strength calculations, insulation coordination studies, reviewing shop drawings, researching equipment, developing voltage drop, conduit fill and battery sizing calculations, generating engineering fee estimates, providing field support during construction, and preparing reports. The successful candidate would also interface with clients and support proposal development. Projects will span across multiple markets and geographies affording opportunities for broadening knowledge and deepening skill sets related to design projects. We are seeking someone who can be an independent self-starter.
Experience And Qualifications

• BS in Electrical Engineering from an accredited university
• 15+ years of experience
• PE License preferred
• Proficient with relevant software such as AutoCAD Electrical, CYME, ETAP, SKM
• Knowledge of relevant standards, including ANSI, IEEE, NESC, NEMA, and OSH
• A Proven experience in meeting design schedules
• Expertise in substation integration for distributed energy resources, renewable energy, and microgrids
• Experience interacting with clients, supporting marketing proposals, and presenting at industry conferences
• Proficient in creating equipment data sheets, evaluating contractor bids, and reviewing shop drawings or researching equipment
• Ability to generate engineering fee estimates, provide field support during construction, and prepare comprehensive reports
• Ability to work well within a team environment, positive attitude, multi-task, and self-motivated to produce high quality work
• Ability and desire to learn and grow professionally
  

Seniority level

• Seniority level

  Director

Employment type

• Employment type

  Full-time

Job function

• Job function

  Information Technology

Referrals increase your chances of interviewing at Pond & Company by 2x

Get notified about new Technical Director jobs in Oklahoma City Metropolitan Area.

First Level Electrical Design and Installation Manager

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Global Engineering design consultancy with offices across Canada is seeking a Senior Electrical Engineer to join their growing operations in Vancouver BC. Salary level from $120,000 - $60,000. Outpost Recruitment is excited to work with our client on this full-time permanent role.As a senior member of the team you can expect to lead the electrical design of various small, medium and large-scale building projects. For the right candidate there is also the opportunity to take on various leadership duties within the office and contribute to growth and success in the Vancouver market.With an emphasis on design excellence, we offer continued development and career growth opportunities to our staff. You will have a chance to work on projects ranging from fast paced developments to multi-year infrastructure projects that improve the lives of everyone associated with it. From solving difficult coordination problems to working closely with all stakeholders you will have the opportunity to change the shape of the Vancouver skyline and be part of projects that will be around for generations to come.

Core Competencies of Senior Electrical Engineer

• Team and project leadership experience and ability to manage resources, financial performance, and delivery of multi-discipline projects as a project leader and as the key interface with our clients
• Strong relationships with local clients and industry partners
• Proven business development experience and work-winning track record
• Ability to contribute to the holistic leadership of our Vancouver office.

Duties and Responsibilities of Senior Electrical Engineer:

• AutoCAD drafting and design operations
• Provide technical assistance to the Senior Designers/Project Managers/Team Leaders as follows:
• Maintain Design ("B" file) file
• Perform Cable calculations
• Perform Lighting modelling
• LV, HC, control and lighting schematic design layout and final design
• Ensure company design checklist is being followed
• Ensure company AutoCAD Standards are being followed
• Maintain AutoCAD files
• Prepare preliminary motor list
• Prepare equipment selections using company selection procedures
• Co-ordinate electrical and mechanical requirements with other disciplines involved in the project design team (i.e. Architects, Structural Consultants, Code Consultants, Geotechnical Consultants, etc.)
• Co-ordinate service requirements/connections with the respective utility and/or municipal agencies
• Review and process shop drawings
• Assist in training junior staff and reviewing their work
• Provide construction administration services as directed
• Write various reports as directed
• Attend site surveys

Skills and Qualifications:

• Legally allowed to live and work in Canada
• P.Eng through EGBC highly desirable
• 10+ years experience (of which at least 5+ in Canada) in electrical building services engineering design
• Established experience across the full project lifecycle
• Strong understanding of relevant electrical codes and standards
• Ability to independently complete engineering analysis and design of electrical systems as well as liaise with clients, contractors, and other project stakeholders
• Ability to verify design work completed by others and provide mentoring, coaching, and training to less experienced engineers
• Strong technical background that you want to continue to build on with experience across different market sectors including residential, office, education and the like
• Demonstrated ability to effectively communicate information of a complex nature both verbally and in writing with all stakeholders across multiple disciplines including colleagues and clients.

Ideal Candidate:

This is an opportunity to join a thriving engineering firm serving a wide range of industries including pharmaceutical and biologics, science and technology, industrial chemicals, and food and beverage.

Cheme is a team of dedicated professionals that are passionate about what we do and how we do it. Cheme is a place where you will be challenged, supported, and given the freedom and ownership to thrive. We attract the best because we continually invest in our people through career planning, training and development, and mentorship. At Cheme we know that our business is successful when our clients succeed, and our clients succeed when our people reach their potential.

Job Description:

Cheme Engineering Technologists are specialists who have achieved solid working knowledge in one or more technical areas. The Technologist will be responsible for implementing best practices and delivering technical excellence in project execution.

Technologists are part of a high-performing team and are responsible for the successful execution of deliverables, effective utilization of their time, and maintaining knowledge of industry best practices.

Technologists work within their discipline group and under the supervision of the Discipline Leader.

The Electrical Technologist is a technical expert capable of providing solutions for Cheme clients in the following areas. (Design and Spec)

• Medium Voltage Distribution
• Low Voltage Distribution
• Motor Control Center Design
• Coordination Studies
• Fault Current Analysis
• Arc Flash Studies
• Grounding
• VFD’s and Motor Controls
• Fire Alarm, Security
• Lighting Design (Industrial Applications)
• Explosive Environment Applications (dust and vapours)
• Ontario Electrical Code/NFPA
• Permitting Process

Duties will consist of a combination of the following tasks:

• Understand each overall project.
• Coordinate with Process, Mechanical and Architectural disciplines.
• Preparation of engineering calculations
• Development of engineering drawings (single lines, risers, layouts)
• Preparation of construction specifications, user requirements, functional specifications, and scope documentation
• Cost estimating
• Technical leadership on assigned projects
• Peer review of engineering work
• Development of templates and tools for discipline area
• Participation in the development of training materials
• Maintaining industry knowledge for discipline area
• Coaching other disciplines for the purpose of understanding/coordination.
• Attendance of factory acceptance testing and on-site coordination and execution of commissioning and validation activities
• Travel to client sites for site review and troubleshooting

Minimum Required Education:

• Graduation from a 3-year post-secondary program in engineering technology.

Professional Requirements:

• Certified by Ontario Association of Certified Engineering Technicians and Technologists. OACETT

Core Competencies:

• Electrical engineering skills with ~3-5 years of current work experience.
• AutoCAD
• Revit an asset
• Field experience is a strong asset
• Independent work on Projects
• Leadership skills an asset
• Proficiency in written and spoken English with the ability to communicate clearly with clients and peers
• Skilled at communicating in a professional and courteous manner
• Use of Microsoft operating system and Microsoft Office Suite to navigate a server environment and prepare engineering documents
• Valid driver’s license and car
• Knowledge of OHSA and the Green Book as it applies to construction in general and electrical construction specifically

Job Description

General Duties:

At Field Aerospace, we power missions that matter. As a trusted leader in aircraft modification and modernization, our work supports critical defense, government, and commercial programs across North America. We’re seeking a highly experienced and strategic Electrical Engineering Manager to lead our electrical engineering team in Toronto.

In this high-impact role, you’ll provide both technical direction and departmental leadership—ensuring project excellence, compliance, and innovation across every initiative. If you're ready to guide a top-performing team through complex aerospace design programs while shaping the future of aviation systems, this is your opportunity to take flight.

Essential Job Functions:

• Lead and manage a multidisciplinary team of Electrical Engineers and Senior Electrical Designers.
• Provide technical oversight and ensure alignment with customer, regulatory, and internal engineering standards.
• Drive team performance in meeting cost, schedule, and design quality objectives across all programs.
• Mentor, develop, and conduct performance evaluations for engineering team members.
• Where delegated, approve engineering designs and ensure airworthiness compliance through appropriate findings.
• Create and enforce engineering design standards that promote consistency, efficiency, and compliance.
• Drive continuous improvement by organizing training sessions, capturing lessons learned, and promoting a culture of learning and innovation.
• Serve as a key member of the Electrical Design Board, contributing to discipline-wide technical growth and business alignment.
• Collaborate with Program Managers to ensure program goals, milestones, and deliverables are met.
• Prepare cost estimates for both recurring and non-recurring engineering efforts.
• Support cross-functional initiatives by working with Marketing and Business Development teams.

Skills and Experiences:

Required Skills & Experience

• Proven expertise in leading engineering teams through complex design, development, and certification processes.
• Deep knowledge of airworthiness requirements, design compliance, and electrical systems integration in aerospace applications
• Minimum 7 years of progressive engineering experience in the aerospace sector, with a focus on electrical systems design.
• Minimum 5 years of management or supervisory experience, ideally in a regulated engineering environment.

Highly Desirable Experience

• Hands-on involvement in aircraft modification, avionics integration, or certification programs.
• Experience working with Transport Canada or FAA certification standards.
• Previous contributions to the development of engineering training, design guides, or process documentation.
• Exposure to international aerospace projects or multi-site team leadership.
• Proficiency in tools such as AutoCAD Electrical, CATIA, or other electrical design and modeling software.

Competencies:

• Integrity & Accountability
• Leadership & Team Development
• Technical Excellence
• Customer Service Orientation
• Innovation & Initiative
• Planning & Organization
• Decision-Making
• Performance Management
• Collaboration & Adaptability

Education:

• Post-secondary diploma or degree in Aerospace Engineering, Electrical Engineering, or a related technical field.
• P.Eng designation or eligibility is considered a strong asset.

Reports to:

Head of Engineering

Physical Requirements:

The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms.

Sedentary work involves sitting most of the time. The employee is occasionally required to climb, balance, stoop, kneel, crouch or crawl. The employee may occasionally lift and move up to 10 pounds and occasionally lift and move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Additional Notes:

Field Aviation is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability or other characteristics protected by law.

• All applicants, must secure CGP clearance within 6 months of applying for it. Field will assist applicant in applying for CGP clearance.
• Field must be able to secure specific licenses from the U.S. government permitting the applicant to work on US government/military matters.

We thank all applicants for their interest, however, only those under consideration will be contacted. Please continue to monitor our website and apply for additional positions for which you are qualified and may be of interest to you.

Job Description

Position : Electrical Engineering Technologist

Location : Bathurst, NB

BUILD YOUR CAREER AT POWER PRECISION

Power Precision is contributing to the clean energy transition.

The team at Power Precision designs and builds transportable buildings that contain switchgear and/or controls that distribute and control electricity.

Power Precision is a subsidiary of Black & McDonald, a family owned, multitrade service provider that safely delivers high quality construction, facilities management, and technical solutions.

ABOUT THIS CAREER OPPORTUNITY

The Power Precision team is growing!

If you are a committed and collaborative professional engineer looking to contribute to a hard-working, innovative team, this opportunity is for you.

At Power Precision, we maintain a positive, creative atmosphere balancing benefits for business and stakeholders, environment, communities, employees and customers.

The Electrical Engineering Technologist position is based at our new location on Miramichi Ave, in Bathurst, NB.

Duties and responsibilities include but are not limited to:

• Design and CAD drawings of industrial or substation power distribution systems.
• Design and draw electrical protection and controls for power distribution.
• Develop electrical engineering conceptual designs for new substation products.
• Design and verify plans in compliance with IEEE, CSA and applicable standards.
• Manage product drawing review and approval process.
• Prepare contracts and purchase agreements with suppliers and subcontractors.

COMPETENCY REQUIREMENTS

• Quality and detail oriented
• Communicate effectively in English
• Concern for the safety of others
• Responsible and accountable
• Problem solving and innovation
• Teamwork, collaboration

EDUCATION REQUIREMENTS

• Diploma in Electrical Engineering Technology

WORK EXPERIENCE REQUIREMENTS

• 5 years of experience in electrical engineering technology supporting the design of electrical power distribution and switchgear consistent with the list of Duties and Responsibilities listed above.

If you are an existing Power Precision or Black & McDonald employee, please notify your supervisor
of your interest and intent to apply before applying.

Job Description

Salary:

Principal Engineering Specialist - Electrical Propulsion - CANADA

Note: This position opening is in Canada, Hybrid in Montreal

About EOS Aircraft, Inc.:

EOS Aircraft, Inc. is an innovative aviation company dedicated to developing a new revolutionary regional aircraft that represents the next leap in sustainable aviation technology. Our mission is to redefine regional air travel by offering an environmentally friendly, efficient, and advanced aircraft solution. We are on a journey to make air travel more sustainable and accessible, and we're looking for a Principal Engineer in Electrical Propulsion to lead our efforts in this exciting and challenging endeavor.

Job Summary

The Principal Engineering Specialist - Electrical Propulsion will be responsible for contributing to the conceptualization, design, integration and certification of the electrical engine system, reporting directly to the Head of Integrated Propulsion Systems. This role demands technical expertise to assist in the selection of the Integrated Motor technology, required sub systems and associated suppliers. The successful candidate will work closely with engineering teams, suppliers, and regulatory agencies to deliver propulsion systems that are innovative, reliable, and efficient.

Essential Duties and Responsibilities

• Define the system architecture, interfaces, and specifications to meet electric engine requirements.

• Evaluate and recommend integrated motor technology and associated suppliers.

• Work closely with suppliers to deliver high quality components and systems.

• Collaborate with engineering team to ensure optimal system integration.

• Develop technical requirement documents for motor and associated systems.

• Provide input to FHA/SSA/FMEA.

• Contribute to strategic planning of propulsion technologies and integration to maintain and enhance the companys competitive edge.

Qualifications:

• Minimum of 15 years in the aerospace industry within an aircraft or OEM environment.

• In-depth knowledge of electric engine technologies, system integration, and aerospace CFR Part 25 and/or CFR Part 33 certification processes.

• Exceptional problem-solving skills and the ability to address technical challenges through innovative solutions.

• Outstanding communication and interpersonal skills, capable of effectively collaborating with internal teams, suppliers, and regulatory bodies.

• Bachelors degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or a related field.

Desired Attributes:

• Masters degree or higher in a relevant engineering discipline.

• Prior experience in integrated motor drives for aerospace applications.

• Prior experience in an aerospace start-up or with (electric) aircraft development is highly valued.

• Demonstrated ability to execute projects from concept through to certification and production.

• A strong passion for innovation in aviation and a commitment to advancing sustainable transport solutions.

Joining EOS Aircraft, Inc. means being part of a dynamic team that is passionate about creating the future of aviation. You'll be at the forefront on the development of the worlds most sustainable regional aircraft. We offer a stimulating work environment where your contributions will have a direct impact on the world, promoting greener, more efficient air travel.

EOS Aircraft, Inc. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description

Description

At General Dynamics Land Systems we put our Customers at the centre of everything we do. Our commitment to protect and enable the people who serve drives us to develop products and systems that give them a clear advantage for mission success. We are looking for passionate individuals to help us deliver innovative, unique solutions to our Customers. 

Job Description  

The Electromagnetic Environmental Effects (E3) role has the responsibility to ensure that the GDLS-C products comply with the applicable E3 requirements. In order to fulfill this responsibility the E3 collaborates with the designers during design development, reviews E3 requirements and their internal and 3rd party compliance artifacts, presents E3 design assessments and investigates issues to determine risk mitigations. Finally the E3 witnesses 3rd party E3 testing, supports customer testing, and plans, executes and reports on vehicle level E3 testing. 

Key Job Elements  

• Reviews, develops and may negotiate the Electromagnetic (EM) Environmental Effects (E3) requirements at component, sub-system and system (e.g. vehicle) level
• Develops training and guidance documents to support the design teams with EM risk mitigation techniques including Grounding and Bonding (G&B), shielding and harness separation.
• Reviews, provides feedback and approves suppliers/vendors E3 compliance artifacts
• Develops component, sub-system and system (e.g. vehicle) test plans, executes internal and customer tests and develops and submits test reports.
• Sets up and employs test equipment such as vector network analyzer, spectrum analyzer, VSWR meters, oscilloscopes, power meters, power supplies, signal generators, micro-ohmmeters, RF amplifiers, LISNs, test antennas/transducers and high frequency E/H field probes
• Gets involved with the management of test equipment, including selection, procurement, maintenance, calibration and operation while observing applicable safety protocols.
• Investigates, identifies root cause and provides solutions to address E3 issues on vehicles, sub-systems and components.
• Performs computer simulations to determine antenna placement, antenna radiation patterns and antenna cosite interference, including cable coupling; Radiation Hazard (RADHAZ) to personnel (HERP), ordnances (HERO) and fuel (HERF).
• Reviews applicable standards (MIL, IEEE, SAE etc) for relevance and advise designers, suppliers and customers on limitations or need for tailored approaches to perform analysis or testing according to acceptable/negotiated deviations from standards
• Prepares and presents E3 assessments at internal and customer design reviews.
• Assess E3 technical gaps, support technology, capability, and product roadmap activities to ensure business is best positioned to achieve its Operating Plan, and maintain competitive solutions.

Position Requirements:  

• University Degree in a relevant engineering discipline 
• Minimum 3-5 years related experience 
• Excellent communication, organization and prioritization skills 
• Demonstrated strength in MS Office applications and other engineering software 
• Ability to work well in a team environment 
• Ability to travel (5% Cdn) and (5% US & Int'l) and possess/be able to acquire and maintain a valid passport. 
• Must be able to meet Anthropometrical Size Restrictions for confined space 

Preferred Requirements:  

• Experience with typical military standards such as MIL-STD-1275, MIL-STD-461/464, and their commercial equivalents 
• Experience with electrical/electronic system on military vehicles, off-road vehicles, and/or typical automotive platforms 
• Experience with FEKO (or similar) simulation application 
• Certified TEMPEST Professional (CTP) or CTP in training 
• Military experience with aforementioned technologies