104 Hardware jobs in Canada

Pay Range (Annual):

At Infinera, your base pay is one part of your total compensation package. Your actual base pay will depend on your skills, qualifications, experience, and location. This role may be eligible for equity grants, discretionary bonuses, or commission payments. The amount of these incentives is based on the terms of the Company’s incentive plans, the Company’s financial performance, and/or individual employee job performance.

Infinera also offers paid leave, health coverage, Registered Retirement Saving Program (RRSP), life and disability insurance to all eligible employees .

The Principal Analog Hardware Design Engineer will lead the development of cutting-edge electro-optical products. This role encompasses responsibility for the architecture, design, testing, validation, and manufacturing of advanced systems, including evaluation platforms and integrated circuit packages.

Key responsibilities also include contributing to the development of the technology roadmap, assessing emerging technology enablers, and driving innovation in product performance and manufacturability.

You will a key member of a dynamic team developing leading-edge telecom products.

Responsibilities

• Architect advanced pluggable optical modules and complex mixed signal solutions.
• Lead conceptual work, product specification, component selection and evaluation, detailed design, prototyping, hardware bring-up and verification
• Perform board development including circuit design, schematic capture and driving PCB placement and layout
• Develop and maintain documentation such as design specifications, test plans and reports
• Collaborate with FPGA, ASIC, system, optical, mechanical designers throughout design and integration
• Work closely with firmware and software developers to define bring-up and debug requirements
• Develop and execute integration and verification to ensure compliance to requirements
• Develop test methods as required
• Define production test and provide manufacturing support as required
• Act as technical lead and provide technical mentorship

Requirements

• MS/BSEE and minimum of 10+ years of experience in board level hardware design including in-depth focus on analog circuitry
• Experience with PCB schematics and layout. Knowledge of Cadence Concept is not essential but considered a plus.
• Experience performing feasibility studies during architecture phase to support component selection
• Strong debugging and lab skills, including test development and detailed verification
• Experience in design and measurement of very low noise analog circuits including op-amps, ADCs and DACs
• Experience in clock and PLL design, analysis and characterization (phase noise, jitter, termination, distribution)
• Experience in design of broadband interfaces and interconnections
• Experience in signal/power integrity modeling, using tools such as Cadence Sigrity
• Experience in 3D EM modeling using tools such as Ansys HFSS desired
• Experience with implementation of on-board power converters, dc-dc step-up, buck and low-noise regulators
• High current, low voltage, power sequencing design and debug experience
• Knowledge of optical components (Lasers, VOAs, MPDs) is a plus
• Experience with E/O and RF test equipment
• Knowledge of PCB fabrication, fab & assembly design rules, product integration with mechanical components
• RF circuit design experience a definite asset
• Experience in noise simulation and filtering of analog driver and monitor circuit considered a plus
• Experience in measuring and analyzing analog signal and noise in time and frequency domain considered a plus
• Experience with low noise sensitive layout design in a high current, high switching noisy environment considered a plus
• Good writing and communication skills
• Good team player with strong attention to detail, organizational skills and demonstrated problem solving abilities

“This position requires direct or indirect access to certain confidential information, hardware, software, technology, or technical information (referred to here as “Export-Controlled Information”) controlled under the U.S. International Traffic in Arms Regulations (ITAR) and/or the U.S. Export Administration Regulations (EAR). All personnel in this position must be eligible to or be able to obtain authorization from the appropriate agency to access applicable Export-Controlled Information. The U.S. Department of Commerce currently requires a foreign person with a most recent citizenship or permanent residency of Sudan, Ukraine, or a country currently designated in Country Group D:1, E:1 or E:2 (Supplement No. 1 to Part 740, Title 15) to have an export control license to access our Export-Controlled Information, unless they meet certain exemptions provided under U.S. export control laws and regulations. The list of applicable countries in Country Group D:1, E:1 or E:2 may be updated by the U.S. government from time to time. The current processing time for an export control license is approximately 4 to 6 months.

Your employment or engagement with Infinera shall be contingent on verifying your eligibility or requirement for obtaining a necessary license and/or authorization from the appropriate agency. You will be required to provide certain information for export control compliance assessment purposes, and your information will be reviewed by Infinera's hiring and export control teams to ensure compliance with the U.S. export control laws and regulations. Infinera will collect necessary documents (such as proof of citizenship etc.) to assess license/authorization requirements if you are offered and accept the position.”

Infinera is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. Infinera complies with all applicable state and local laws governing nondiscrimination in employment.

Location:     Ottawa, Ontario

    Hybrid

Term:    Perm

High Tech Genesis is seeking a Senior Hardware Engineer who will be responsible for the planning, scheduling, architecture, design, testing, and delivery to manufacturing of carrier-grade hardware. This includes hardware for optical line systems supporting 400Gbps and beyond, as well as broadband fiber access systems with PON rates up to 50Gbps.

Your responsibilities will include:

• Lead HW development projects and advise and mentor other HW team members.

• Own all aspects of circuit pack development schedule, prototype delivery, product testing and product certification.

• Work with product line management and other managers to interpret and negotiate product features and specifications.

• Lead and interface with contract resources outside of your organization.

• Define technical specifications to support design concepts, and participate in specification peer reviews.

• Participate in design reviews, guide technical discussions to conclusion.

• Interface with component vendors and negotiate design specifications with external suppliers.

• Review Designs to ensure they meet architecture goals.

• Support the technology transfer to manufacturing/production testing.

Job Description

Hardware Design Engineer

Founded in 1991, the Mircom Group of Companies is North America’s largest independent designer, manufacturer and distributor of intelligent building and life safety solutions. Reaching customers in over 100 countries worldwide, our portfolio includes: fire detection & alarm, communications & security, mass notification, nurse call, and building automation & smart technologies.

Mircom’s mission is to save lives and protect property by providing a line-up of innovative and advanced solutions which are scalable to satisfy diverse user demands, from small buildings to the largest complexes. Our unwavering commitment to North American manufacturing enables us to offer the highest quality and best competitive value across our vast range of products and solutions.

Summary:

Mircom is seeking talented, independent individuals that have previous experience in analog, digital and mixed signal circuit design. The ideal candidate is expected to demonstrate knowledge on a broad range of systems and circuits, including: Power supplies, small signal and power amplifiers, signal processing, microcontroller based systems, FPGA based digital systems, serial communications channels, ADC/DAC converters, EMI/EMC filtering and protection. This is a full time permanent role based out of our Head Office in Vaughan, ON.

• Analyze product requirements and create a detailed hardware architecture and formal structured design.
• Conduct circuit analysis from requirements to formal design.
• Perform simulations to validate design choices.
• Design of electronic circuits using suitable components, systems and equipment.
• Design auxiliary tools, prototypes and test interfaces.
• Circuit debugging and troubleshooting.
• Prepare product operational documentation to support software development.

• Bachelor’s, Master’s, or PHD Degree in Electrical Engineering
• Analog, Digital and Mixed Signal Circuits Analysis and Design experience.
• Embedded Systems.
• DC/DC Power Converters.
• FPGA Design.
• Audio Power Amplifiers.
• A/D and D/A Converters.
• Passive and Active Filters.
• Microprocessors and microcontrollers.
• Serial Communication (UART, SPI, I2C, USB, I2S, Ethernet).
• Schematic Drawing.
• Ability to manage time effectively to meet schedule commitments.
• Good oral/written communication and interpersonal skills to support work in a team environment.
• Self-started, versatile and eager to learn.

Desired Skills:

• Hands-on PCB Layout knowledge
• Analog circuit simulation
• C programming experience
• VHDL programming
• DFT and DFM techniques
• Experience with Altium Designer, Matlab and PSPICE

What Mircom Offers:

• A great working environment with opportunities for advancement
• Competitive salary
• Group Insurance benefits
• Company RRSP program

We would like to thank all applicants for their interest in this position however only those selected for interviews will be contacted.

Mircom Group of Companies is an equal opportunity employer that considers all applicants regardless of cultural background, religion, marital status, sexual orientation, family status, disability or any other grounds as outlined in the Ontario Human Rights Code. In compliance with the Accessibility for Ontarians with Disabilities Act, Mircom is committed to providing a welcoming and inclusive work environment for all individuals with disabilities in a respectful and dignified manner. Accommodations will be made available, upon request, to applicants who have specialized needs throughout the recruitment process.

Disclaimer: Mircom does not accept resumes from employment placement agencies, head-hunters or recruitment suppliers that are not in a formal contractual arrangement with us. Our recruitment supplier arrangements are restricted to specific hiring needs and do not include this or other job postings. Any resume or other information received from a supplier not approved in advance by Mircom to provide resumes to this posting or website will be considered unsolicited

Job Description

Salary: $75-110k

Join Our Innovative Team as a Hardware/Mechatronics Engineer at STL Engineering!

*Must have Canadian Citizenship or have a valid Permanent Resident Card and Drivers License

Full Job Description

STL Engineering is looking to fill the position of Hardware Engineer. As a Hardware Engineer, you will be responsible for designing, developing, and testing mechanical and electronic systems for a variety of cutting-edge projects. You will work closely with a multidisciplinary team of engineers to create innovative solutions that meet our clients' needs. If you are passionate about hardware and mechatronics engineering, this is an excellent opportunity to enhance your skills.

Who are we: STL Engineering is a leading Mechanical/Electrical Engineering and Design services provider based in Ottawa, ON. Specializing in rugged electronics and applications. We are committed to delivering innovative solutions to our clients' engineering challenges.

Responsibilities include but are not limited to:
Design and Development: Create detailed designs for mechanical and electronic systems, including schematic diagrams, PCB layouts, and mechanical drawings.
Prototyping: Build and test prototypes to validate design concepts and functionality.
System Integration: Developing electronic subsystems into complete assemblies, with attention to mechanical and electrical constraints, thermal management, EMI/EMC compliance, and manufacturability. .
Testing and Debugging: Conduct rigorous testing and debugging of hardware and software to identify and resolve issues.
Collaboration: Work closely with cross-functional teams, including software engineers, mechanical engineers, and project managers, to deliver high-quality products on time.
Documentation: Prepare comprehensive documentation for designs, including specifications, user manuals, and maintenance guides.
Compliance: Ensure all designs comply with industry standards, safety regulations, and client requirements.
Continuous Improvement: Stay up to date with the latest technologies and industry trends to continually improve design processes and product quality.

The ideal candidate should possess:
Education: Successfully completed Electrical Engineering program, or a related field.
Technical Skills:

• Experienced in designing, simulating, and troubleshooting mixed-signal circuits, including low-noise analog front-ends, power regulation, microcontroller/DSP interfaces, and high-speed digital logic. Skilled with schematic capture and PCB layout tools (e.g., Altium, KiCAD).Experience with mCAD software (e.g., SolidWorks, Creo) a plus.

Knowledge:Understanding of electronic circuit theory and practical design principles for both analog and digital systems in high reliability environments. Proficient in using simulation tools such as SPICE (LTspice, PSpice), Multisim, and behavioral modeling to validate performance, analyze signal integrity, and optimize designs before prototyping. Understanding of mechanical systems, control systems, and robotics an asset.
Problem-Solving: Excellent analytical and problem-solving skills with the ability to troubleshoot complex systems.
Communication: Strong verbal and written communication skills, with the ability to convey technical information clearly and concisely.
Attention to Detail: High level of accuracy and attention to detail in all aspects of design and documentation.
Teamwork: Ability to work effectively in a collaborative, fast-paced team environment.
Adaptability: Willingness to learn new skills and adapt to changing project requirements and priorities.

Paid Time Off:
Stat Holidays
3 weeks Vacation, Standard

Schedule:
37.5 Hour Work Week

Monday to Friday

Work Location:
Kanata, ON

At STL Engineering, we foster a family-like environment where every employee is valued. As an equal opportunity employer, we prioritize diversity in our workforce, recognizing that innovation thrives on varied perspectives. We embrace individuals from diverse backgrounds, including ethnicity, religion, and education, without regard to race, age, gender, or sexual identity. With years of experience in the engineering industry, we understand that a strong foundation of diversity and inclusion is essential for success.

Job Description

Salary: $80,000-$100,000

About The Company

At Corinex, we are driving the future of energy with cutting-edge Broadband over Power Line (BPL) technology. As a global leader in smart grid solutions, we enable utilities to enhance grid visibility, flexibility, and decarbonization, supporting the seamless integration of renewable energy, electric vehicles, and heat pumps into the power grid.

Headquartered in Vancouver, Canada, Corinex is the market leader in Europe, particularly in Spain, where our BPL solutions are deployed by major DSOs (Distribution System Operators) to improve grid operations. With successful implementations across global markets, our technologies accelerate the transition to a more sustainable, decentralized, and efficient energy infrastructure. Recognized as a key contributor to industry standards and a 2024 Deloitte Technology Fast 50 winner, Corinex is shaping the future of smart energy.

About The Job

We are seeking a highly skilled and motivated Hardware Product Engineer to join our engineering team in designing and developing next-generation industrial-grade smart grid communication devices. This role offers the opportunity to work at the forefront of cleantech innovation, contributing to the full hardware product lifecycle- from concept through regulatory compliance, testing, and production.

The ideal candidate will have a strong background in electronics and embedded systems, with experience in both hardware and software integration. You will play a key role in shaping the future of smart energy infrastructure by collaborating with cross-functional teams to deliver reliable, high-performance solutions that meet market needs and compliance standards.

If you are passionate about designing cutting-edge hardware systems and want to make a meaningful impact in the energy and communication industry, wed love to hear from you.

Duties & Responsibilities:

• Design and develop industrial grade hardware product for new generation smart grid communication devices and equipment to meet market and regulatory compliance requirements
• Conduct systematic evaluation and testing of products. Including PCBA hardware, reliability, environmental and regulatory testing to benchmark Product performance into concise test reports
• Contribute to system design discussions and provide comprehensive solutions for new and existing products.
• Translate open-ended user requirements into clear and specific product functional components.
• Design and develop factory test software in C# or C/C++, Bash, and Python for embedded environments, including Embedded Linux.
• Collaborate with Firmware and manufacturing teams to ensure seamless integration and delivery of end products.
• Drive continuous improvement initiatives and contribute to development best practices.
• Work closely with product management to understand requirements and translate them into functional solutions.

Qualifications:

• Bachelors degree in Electrical Engineering, Electronics, Computer Engineering, or related field.
• Experience in hardware product development, preferably in IoT, telecom, or powerline communication systems.
• Proficient in schematic design, PCB layout, and debugging tools (e.g. Altium Designer, KiCAD, or equivalent).
• Hands-on experience with lab equipment (oscilloscopes, logic analyzers, multimeters, etc.).
• Solid understanding of embedded systems, signal integrity, power distribution, and EMC/EMI considerations.
• Knowledge of product development lifecycle from concept to manufacturing.
• Familiarity with compliance testing and regulatory standards (FCC, CE, UL, CSA, etc.).
• Strong problem-solving skills and attention to detail.
• Ability to interpret technical drawings, datasheets, and hardware specifications.
• Excellent communication and cross-functional collaboration skills.
• Self-motivated and able to work in a fast-paced, deadline-driven environment.

Preferred Qualifications:

• Masters degree in Electrical or Computer Engineering.
• Experience with wireless and wired communication protocols (e.g. Wi-Fi, Bluetooth, PLC, Ethernet).
• Background in smart grid, cleantech, or energy management systems.
• Experience working with contract manufacturers and external vendors.
• Knowledge of thermal and mechanical constraints in hardware design.
• Experience with product certification processes.
• Familiarity with Agile product development methodologies.

Job Description

Salary:

Anyon Systems is a quantum computing company located in the Greater Montreal Region andwith presence in Waterloo, Ontario. We work at the cutting edge of technology to develop and commercialise superconducting quantum computers. The company is rapidly growing and has both hardware and software groups to achieve its R&D goals.

You will be working within our QuantumHardwareTeam, a team of engineers and scientists dedicated to the design, fabrication, and testing of novel superconducting quantum processors.You will collaborate closely with other teams when required. In this role, you will draw on your strong expertise as well as as your critical thinking and obsession for documentation.

If you are a self-starter, team player, have the hunger to venture into unknown areas, are results oriented and work cohesively within the team. Join us!

Quantum Hardware Engineer Experienced

Location:Montreal, Qc. Canada
Job Type:Full-Time | Senior-Level | Department: Physics

Responsibilities

• Lead the conceptual design, simulation, and validation of advanced superconducting quantum circuits.
• Lead experimental effort on characterization, calibration and/or control of quantum devices and processors.
• Optimize layout and design workflows using the Anyon Systems toolkit and industry best practices.
• Collaborate with R&D, nanofabrication, and systems teams to align hardware development with system-level goals.
• Prepare detailed technical documentation, design reports, and contribute to roadmap planning.

Qualifications

• Ph.D. in Physics, Electrical Engineering, or a related field with 25 years of industry experience in quantum hardware or superconducting devices.
• Proven track record in developing and validating quantum circuit designs.
• Strong proficiency in Python and/or C++, especially in scientific or simulation contexts.
• Deep understanding of microwave engineering, quantum optics, and superconducting quantum circuits.
• Hands-on experience with nanofabrication processes involving superconducting materials.
• Experience with design validation using FEM or equivalent simulation tools.

Key Skills

• Leadership in technical problem-solving and project execution.
• Strategic thinking with a systems-level understanding of quantum computing.
• Excellent communication and mentorship skills; ability to work across teams.

Job Description

Salary:

Anyon Systems is a quantum computing company located in the Greater Montreal Region andwith presence in Waterloo, Ontario. We work at the cutting edge of technology to develop and commercialise superconducting quantum computers. The company is rapidly growing and has both hardware and software groups to achieve its R&D goals.

You will be working within our QuantumHardwareTeam, a team of engineers and scientists dedicated to the design, fabrication, and testing of novel superconducting quantum processors.You will collaborate closely with other teams when required. In this role, you will draw on your strong expertise as well as as your critical thinking and obsession for documentation.

If you are a self-starter, team player, have the hunger to venture into unknown areas, are results oriented and work cohesively within the team. Join us!

Quantum Hardware Engineer Junior Level

Location:Montreal, Qc. Canada
Job Type:Full-Time | Entry-Level | Department: Physics

Responsibilities

• Assist in the design and simulation of superconducting quantum circuits under guidance from senior engineers.
• Support circuit layout development and validation using Anyon Systems design toolkit.
• Conduct experimental work related to characterization, calibration and control of quantum devices.
• Participate in technical discussions and team meetings.
• Contribute to design documentation and collaborate with the nanofabrication team on basic process reports.

Qualifications

• Graduate degree (M.Sc. or Ph.D. in progress/completed) in Physics, Electrical Engineering, or a related field.
• Academic or internship experience related to quantum information science or quantum circuits.
• Familiarity with Python and/or C++ programming.
• Strong knowledge of at least one of the following: microwave engineering, quantum optics, superconducting circuits, many-body physics
• Exposure to nanofabrication or simulation tools (e.g., FEM) is a plus.

Key Skills

• Eagerness to learn and develop hands-on quantum hardware skills.
• Strong analytical and problem-solving abilities.
• Collaborative mindset and clear communication skills.

Job Description

Salary:

Anyon Systems is a quantum computing company located in the Greater Montreal Region andwith presence in Waterloo, Ontario. We work at the cutting edge of technology to develop and commercialise superconducting quantum computers. The company is rapidly growing and has both hardware and software groups to achieve its R&D goals.

You will be working within our QuantumHardwareTeam, a team of engineers and scientists dedicated to the design, fabrication, and testing of novel superconducting quantum processors.You will collaborate closely with other teams when required. In this role, you will draw on your strong expertise as well as as your critical thinking and obsession for documentation.

If you are a self-starter, team player, have the hunger to venture into unknown areas, are results oriented and work cohesively within the team. Join us!

Quantum Hardware Engineer Mid-Level

Location:Montreal, Qc. Canada
Job Type:Full-Time | Intermediate | Department: Physics

Responsibilities

• Independently design and simulate novel superconducting quantum circuits.
• Develop and validate circuit layouts using the Anyon Systems design toolkit.
• Develop experimental protocols and perform experimental work on superconducting quantum devices.
• Collaborate closely with the nanofabrication team to guide implementation and process optimization.
• Communicate technical results clearly in reports, presentations, and cross-functional meetings.

Qualifications

• Ph.D. in Physics, Electrical Engineering, or a closely related field with a strong focus on quantum information or quantum devices.
• 13 years of postdoctoral research experience in quantum hardware, superconducting circuits, or a related field.
• Proficient in Python and/or C++ for simulation or instrumentation.
• Experience with microwave engineering and/or superconducting circuits and/or quantum optics.
• Experience with design validation using FEM or similar tools.
• Exposure to nanofabrication and superconducting qubits is highly desirable.

Key Skills

• Self-motivated, with the ability to manage tasks independently.
• Strong critical thinking and troubleshooting skills.
• Effective communicator, capable of contributing to cross-disciplinary projects.