81 Repair jobs in Canada

Job Description

About CSN Collision

CSN Collision safely repairs more than 200,000 vehicles a year helping Canadians get back on the road with the trust and comfort of knowing their vehicle has been returned to like new condition. Since 2002, CSN has grown to become the leader in collision repair with 400+ collision repair Centres across Canada, USA and Italy.

Position Summary:

CSN Collision is looking for an Auto Body Technician to join our team. Our Auto Body Technician must be able to take a vehicle in a damaged state and repair or restore damaged vehicles to their original structural integrity, function, and appearance. The Incumbent is detailed oriented and can multitask to accommodate shifting priorities.

Primary Objectives of the Auto Body (Collision Repair) Technician:

• Review damage report and estimates of repair cost and plan work to be performed
• Thoroughly examine collision damage (Review the complete vehicle exterior body parts, check all power accessories (door locks/windows/mirrors are operational) check that the dash panel has no warning lights on. Identify any prior damages overlooked on the QA checklist/ or related on the supplemental damage sheet.)
• Performing structural and complete body repairs : Repair and replace front end components, body components, doors and frame and underbody components. (Assess, Repair or Replace interior and exterior parts, electrical components, and vehicle accessories, doors and frame and underbody components)
• Straighten bent frames using frame and underbody pulling and anchoring equipment, Hammer out dents, buckles and other defects using blocks and hammers.
• Welding on vehicles with the use of MIG welders and compression spot welders.
• Fully dismantle the complete vehicle damaged areas including the blend panel parts in order to identify all hidden damages as early in the repair cycle as possible. For example remove damaged fenders, panels and grills using wrenches and cutting torch and bolt or weld replacement parts into place, repair or replace damaged windows, windshields and sunroof
• Ability to file, grind and sand repaired surfaces, using power tools and hand tools
• Mask and tape auto body surfaces in preparation for painting, apply primers and repaint surfaces.
• Operate soldering equipment or use plastic filler to fill holes, dents and seams
• Restore vehicle to factory specification (Return the vehicle back to factory/OEM specifications)
• Inspect repaired vehicles and test drive vehicles for proper handling
• Technician must be able to read and understand the estimates.
• Capable of reading and comprehending automotive repair procedures.
• Able to work with a variety of metals and plastics, as well as glass, electrical, and mechanical parts.
• Experience using frame and measuring equipment.
• Experience with disassembly and reassembly of vehicles
• Perform other duties as assigned by management.

Requirements

• Auto Body Repair and refinishing experience - 3+ years required
• Auto Body Collision and Damage Repairer (310B) Red Seal License (310Q) (Preferred but not a must) or in a registered apprenticeship program.
• Technicians with I-Car and OEM certifications are favorable.
• I car Welding certification
• Carrying, Lifting – 100 lbs, standing, sitting, walking, reaching)
• Valid driver's license required
• Must have own tools, safety footwear.
• Up-to-date Compliance Training, such as AODA,WHMIS, Worker Health and safety Awareness and Workplace Violence and Harassment)and knowledge of Information Security PIPEDA
• 3 to 5 years of working Knowledge of Mitchell / Audatex

Benefits

What we offer:

• Supplemental Pay: Bonus
• Benefits: Health, dental, vision
• Paid time off

Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and will evolve as CSN continues to grow

CSN is an Equal Employment Opportunity employer. Qualified applicants will receive consideration for employment regardless of age, race, colour, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We strive to cultivate an inclusive, accessible environment, where all employees and customers feel valued, respected, and supported. We are dedicated to growing our corporate team in a way that reflects the diversity of our customers and communities in which we live and serve.

If you require an accommodation for the recruitment/interview process (including alternate formats of materials, or accessible meeting rooms or other accommodation), please let us know and we will work with you to meet your needs.

At CSN Collision, we’re always looking for passionate, skilled, and dedicated individuals who take pride in their work and want to be part of a collaborative and high-performing team. This posting is part of our ongoing efforts to proactively build a pipeline of talented professionals for future opportunities. If your background and experience align with what we’re looking for, a member of our team will reach out when a suitable opportunity arises.

By applying, you’ll be joining our talent community, giving us the opportunity to connect with you when the timing is right. We appreciate your interest in CSN Collision and look forward to potentially working together in the future.

Job Description

*$2500 SIGNING BONUS FOR RED SEAL TECHS*

Reporting Relationship: This position reports directly to the Director.

Job Summary:

Birchwood Collision Centre in Headingley is hiring a Body Repair Technician to join the Team.

Birchwood Body Repair Technicians can expect:

• High volume shops with above-average hours for Technicians

• Employee benefits for all Full-Time employees

• Most manufacturer certifications in Manitoba

• ICAR GOLD class professionals

The successful candidate will possess the willingness and ability to maintain current technical knowledge, the ability to estimate the time of service and repair needed, and diagnose and complete the required work right the first time.

Qualifications :

• Licensed Red Seal Certified Technician is preferred but not require

• Levels 3 to 4 are encouraged to apply

• Thrive in a collaborative environment, where teamwork is essential

• High attention to detail with proven time management and organizational skills

• A commitment to continuous learning and professional development

• Comfortable leveraging technology for most day to day functions

• Ability to remain to teach and coach in a fast-paced environment

• Valid driver's license, clean driving record and transportation to work are required

What Birchwood Can Offer You:

• Competitive compensation – in addition to salary, many roles have bonus and commission incentives that reward you for success

• Full benefits package including vacation time, company-paid extended health, dental/vision coverage, and employee assistance – with flex plan options

• RSP Matching program – Birchwood will match up to $5,000 of your regular earnings after 1 year of employment

• Employee referral bonus program – refer your friends to Birchwood and receive a referral bonus

• Career development opportunities & internal promotions

• Learning & development opportunities

• Wellness program

• Corporate discounts & group savings plan

• Volunteer program – Dollars for Doing

• Company events – Birchwood Bucks, Circle of Excellence, holiday parties

Birchwood is Manitoba’s largest automotive retailer. Our 24 franchises are in addition to four state-of-the-art collision repair centres and four Birchwood Credit Solutions locations. We offer sales, services, and parts to meet our customers’ automotive needs. We’re a recognized leader in the retail automotive industry, not only for our diverse workforce reflecting our community, but also for our unparalleled commitment to team members, customers, partners, and neighbourhoods. At Birchwood, our days begin and end with gratitude, personal leadership, trust, respect, continuous improvement, and generosity.

Birchwood is committed to creating a diverse workplace and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Reasonable accommodation is available to applicants with disabilities upon request. Please email your request to:

Job Description

Salary: $60,502 - $86,432

Who we are:

Reliable Controls is dedicated to reducing the carbon footprint of buildings around the world. Our team specializes in the design, development, and assembly of building automation controls and software programs.

We align ourselves with the right people and empower them in the right ways. An established company based in Victoria, BC, we nurture a strong culture of communication, trust, and collaboration. Embracing a worklife balance, promoting continuous learning, and celebrating our achievements are a few of the ways we show our enduring commitment to employees. Lets combine our passions for building a greener future!

Your mission:

As a Senior Repair Technician, your mission is to ensure the quality and reliability of our products through expert diagnosis, repair, and continuous improvement of electronic hardware. Youll support product excellence by identifying issues, collaborating with engineering, and sharing your knowledge to guide and mentor junior team members, all while helping to strengthen our internal processes and uphold high standards of technical integrity.

What we offer:

• Highly competitive extended health and dental plans for you and your family
• A yearly RRSP contribution on the companys behalf, plus an employee contributionmatching program to help you grow your financialwell-being
• Participation in company profit sharing scheme
• Paid time off to volunteer and give back to the community, on your own or as a part of a group with yourcoworkers
• Freeon-premiseparking, or choose our green transportationoptionand be paid for it
• Social Committee eventsalmost everymonth, from potlucks, game nights, and LAN parties to camping andskiing
• Free on-site gymat both locations
• Awards and recognition for service and accomplishments
• Assistancewith tuition or skills training relevant to yourrole
• A rewarding career doing work thatmatters

What we hope to create:

Solutions for building operators to enable the vision of Net-Zero Emissions by 2050. Help us get there.

In this role you will:

• Develop and maintain troubleshooting procedures and repair manuals
• Evaluate returned items to determine warranty eligibility or customer-caused damage
• Issue RMA (Return Merchandise Authorization) numbers to customers
• Provide software unlock codes as needed
• Maintain and update the service parts database
• Monitor and manage service parts inventory levels
• Perform quality control checks and rework defective new products
• Service and repair customer-returned products
• Identify and report product design issues to the appropriate R&D staff
• Collaborate with engineering to review issues found in returned products
• Develop and implement test jigs and diagnostic procedures for troubleshooting
• Assist with prototype assembly and rework for research and development
• Train testing technicians on repair and rework techniques
• Use the latest RCC application software (e.g., RC-Studio, RC-Toolkit) to verify product functionality
• Proofread technical documents and procedures

You'll have access to:

• An onboarding package to get you up to speed
• Online training courses
• A mentor
• A yearly training allowance

This role might be right for you if you have:

• Diploma or certificate in Electronics Technology, Electrical Engineering Technology, or a related field
• 5+ years of hands-on experience repairing and troubleshooting electronic products
• Strong knowledge of analog and digital circuits, including soldering and rework (SMD and through-hole)
• Proficient in using diagnostic tools such as multimeters, oscilloscopes, and logic analyzers
• Ability to read and interpret schematics, wiring diagrams, and technical documentation
• Familiarity with embedded systems, firmware, and software-assisted troubleshooting
• Experience documenting repair procedures and reporting technical issues to engineering teams
• Strong communication skills and ability to collaborate across technical teams
• Organized, detail-oriented, and able to manage inventory and service part tracking

Youll be successful in this position if you:

• Have strong technical instincts and enjoy getting to the root of hardware issues
• Take pride in precision work and hold yourself to a high standard of quality
• Are comfortable navigating detailed procedures while staying flexible in your approach
• Enjoy collaborating with engineering and production teams to improve processes and outcomes
• Value a healthy worklife balance; we don't expect you to work overtime or weekends

Lets connect!

At Reliable Controls its not only experience and skills we are seeking; alignment with our values is of the utmost importance to us. Continuous improvement is vital to our organization, and we are prepared to invest in our teams future, not just their current abilities. Lets connect. We would love to hear from you!

Job Description

About CSN Collision

CSN Collision safely repairs more than 200,000 vehicles a year helping Canadians get back on the road with the trust and comfort of knowing their vehicle has been returned to like new condition. Since 2002, CSN has grown to become the leader in collision repair with 400+ collision repair Centres across Canada, USA and Italy.

Position Summary:

CSN Collision is looking for an Auto Body Technician to join our team. Our Auto Body Technician must be able to take a vehicle in a damaged state and repair or restore damaged vehicles to their original structural integrity, function, and appearance. The Incumbent is detailed oriented and can multitask to accommodate shifting priorities.

Primary Objectives of the AutoBody (Collision Repair) Technician:

• Review damage report and estimates of repair cost and plan work to be performed
• Thoroughly examine collision damage (Review the complete vehicle exterior body parts, check all power accessories (door locks/windows/mirrors are operational) check that the dash panel has no warning lights on. Identify any prior damages overlooked on the QA checklist/ or related on the supplemental damage sheet.)
• Performing structural and complete body repairs : Repair and replace front end components, body components, doors and frame and underbody components. (Assess, Repair or Replace interior and exterior parts, electrical components, and vehicle accessories, doors and frame and underbody components)
• Straighten bent frames using frame and underbody pulling and anchoring equipment, Hammer out dents, buckles and other defects using blocks and hammers.
• Welding on vehicles with the use of MIG welders and compression spot welders.
• Fully dismantle the complete vehicle damaged areas including the blend panel parts in order to identify all hidden damages as early in the repair cycle as possible. For example remove damaged fenders, panels and grills using wrenches and cutting torch and bolt or weld replacement parts into place, repair or replace damaged windows, windshields and sunroof
• Ability to file, grind and sand repaired surfaces, using power tools and hand tools
• Mask and tape auto body surfaces in preparation for painting, apply primers and repaint surfaces.
• Operate soldering equipment or use plastic filler to fill holes, dents and seams
• Restore vehicle to factory specification (Return the vehicle back to factory/OEM specifications)
• Inspect repaired vehicles and test drive vehicles for proper handling
• Technician must be able to read and understand the estimates.
• Capable of reading and comprehending automotive repair procedures.
• Able to work with a variety of metals and plastics, as well as glass, electrical, and mechanical parts.
• Experience using frame and measuring equipment.
• Experience with disassembly and reassembly of vehicles
• Perform other duties as assigned by management.

Requirements

• Auto Body Repair and refinishing experience - 3+ years required
• Auto Body Collision and Damage Repairer (310B) Red Seal License (310Q) (Preferred but not a must) or in a registered apprenticeship program.
• Technicians with I-Car and OEM certifications are favorable.
• I car Welding certification
• Carrying, Lifting – 100 lbs, standing, sitting, walking, reaching)
• Valid driver's license required
• Must have own tools, safety footwear.
• Up-to-date Compliance Training, such as AODA,WHMIS, Worker Health and safety Awareness and Workplace Violence and Harassment)and knowledge of Information Security PIPEDA
• 3 to 5 years of working Knowledge of Mitchell / Audatex

Benefits

What we offer:

• Supplemental Pay: Bonus
• Benefits: Health, dental, vision
• Paid time off

Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and will evolve as CSN continues to grow

CSN is an Equal Employment Opportunity employer. Qualified applicants will receive consideration for employment regardless of age, race, colour, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We strive to cultivate an inclusive, accessible environment, where all employees and customers feel valued, respected, and supported. We are dedicated to growing our corporate team in a way that reflects the diversity of our customers and communities in which we live and serve.

If you require an accommodation for the recruitment/interview process (including alternate formats of materials, or accessible meeting rooms or other accommodation), please let us know and we will work with you to meet your needs.

At CSN Collision, we’re always looking for passionate, skilled, and dedicated individuals who take pride in their work and want to be part of a collaborative and high-performing team. This posting is part of our ongoing efforts to proactively build a pipeline of talented professionals for future opportunities. If your background and experience align with what we’re looking for, a member of our team will reach out when a suitable opportunity arises.

By applying, you’ll be joining our talent community, giving us the opportunity to connect with you when the timing is right. We appreciate your interest in CSN Collision and look forward to potentially working together in the future.

Job Description

Company Description

Our drive and control technologies ensure efficient, powerful and safe movement in machines and systems of any size. We inspire our customers with intelligent components, tailored system solutions, and services – from fully connected applications to the factory of the future. Bosch Rexroth is dedicated to making the world a better place through innovation and technology. We are looking for associates who will take on our customers’ challenges with passion and persistence until the right solution is found and who will thrive in a face-paced, collaborative and exciting environment. 

Why work with Bosch Rexroth? 

• Challenging Projects : We are driven by innovation and being at the cutting edge of everything that we do. At Bosch Rexroth every day is different, and your time will be filled with interesting and exciting projects. 
• Amazing Colleagues:  Our people make us who we are, and we are very proud of our diverse and skilled global team. Having a supportive and encouraging team around you can make all the difference. 
• Learning and Development:  We want you to reach your fullest potential, for both yourself and for Bosch Rexroth. That’s why we actively promote growth and development. 
• Change the World:  We want to give you the opportunity to not only drive your career forward but also to change the world. The work we do at Bosch Rexroth can make a big difference to the world around you. 
• Social & Value-Driven:  We have a tradition of assuming social responsibility in all that we do. Our success, and our roadmap for the future, is based on our lived values. This covers everything, from community to the environment, to being a social employer. 
• Flexibility & Freedom:  We strive to give you a balance between your work and home life, as well as the freedom to drive your career forward. 
• International Opportunities:  We are a truly global, fully networked company, with locations in more than 80 countries all over the world. 

As the hydraulic Repair Technician, you will be responsible for the successful repair of Bosch Rexroth fluid power solutions in the Western Region.  Duties & responsibilities will include, but are not limited to: 

• Disassemble, inspect, and report condition of hydraulic components for repair and warranty considerations
• Formulate a hypothesis as too possible root cause of failure
• Assemble products in accordance with factory procedures and specifications
• Function test product as required using procedures and specifications
• Participate in component conversion process
• Observe instructions and regulations relating to HSE standards when carrying out assigned duties
• Any and other duties as required
• Assist with service technical inquiries where required

• College Diploma in Mechanical Technology or Fluid Power Technology (or equivalent)
• 2-3 years experience in a shop or industrial environment
• Valid drivers license with reasonably clean driving record
• Tow motor operation and safety
• Overhead crane operation and rigging
• Proficient computer skills specifically in Windows and MS Office
• Attention to detail and thorough when performing work
• Able to plan and prioritize in a multi-tasking work environment
• Write in clear, concise, organized, and convincing manner

Compensation & Perks

• Competitive compensation package
• Retirement Savings Matching Program
• Discounts on Bosch Products
• Partnership with Perkopolis Discounts

Flexibility & Time Off

• 3 weeks of vacation in your first year of employment
• 3 paid sick days

Health & Wellness

• Health, Dental & Vision Benefits
• Annual $500 in Wellness Spending Account

Growth & Development

• Tuition Reimbursement Program
• Mentorship Program
• Global networking opportunities

By choice, we are committed to a diverse workforce and are an equal opportunity employer. Bosch Rexroth welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in the selection process.

Job Description

About CSN Collision

CSN Collision safely repairs more than 200,000 vehicles a year helping Canadians get back on the road with the trust and comfort of knowing their vehicle has been returned to like new condition. Since 2002, CSN has grown to become the leader in collision repair with 230 collision repair Centres across Canada.

Position Summary:

CSN Tilbury is looking for an Auto Body Technician to join our team. Our Auto Body Technician must be able to take a vehicle in a damaged state and repair or restore damaged vehicles to their original structural integrity, function, and appearance. The Incumbent is detailed oriented and can multitask to accommodate shifting priorities. .

Primary Objectives of the Auto Body (Collision Repair) Technician :

• Review damage report and estimates of repair cost and plan work to be performed
• Thoroughly examine collision damage (Review the complete vehicle exterior body parts, check all power accessories (door locks/windows/mirrors are operational) check that the dash panel has no warning lights on. Identify any prior damages overlooked on the QA checklist/ or related on the supplemental damage sheet.)
• Performing structural and complete body repairs: Repair and replace front end components, body components, doors and frame and underbody components. (Assess, Repair or Replace interior and exterior parts, electrical components, and vehicle accessories, doors and frame and underbody components)
• Straighten bent frames using frame and underbody pulling and anchoring equipment, Hammer out dents, buckles and other defects using blocks and hammers.
• Welding on vehicles with the use of MIG welders and compression spot welders.
• Fully dismantle the complete vehicle damaged areas including the blend panel parts in order to identify all hidden damages as early in the repair cycle as possible. For example remove damaged fenders, panels and grills using wrenches and cutting torch and bolt or weld replacement parts into place, repair or replace damaged windows, windshields and sunroof
• Ability to file, grind and sand repaired surfaces, using power tools and hand tools
• Mask and tape auto body surfaces in preparation for painting, apply primers and repaint surfaces.
• Operate soldering equipment or use plastic filler to fill holes, dents and seams
• Restore vehicle to factory specification (Return the vehicle back to factory/OEM specifications)
• Inspect repaired vehicles and test drive vehicles for proper handling
• Technician must be able to read and understand the estimates.
• Capable of reading and comprehending automotive repair procedures.
• Able to work with a variety of metals and plastics, as well as glass, electrical, and mechanical parts.
• Experience using frame and measuring equipment.
• Experience with disassembly and reassembly of vehicles
• Ability and willingness to follow standardized production processes.
• Be a great CSN ambassador.
• Perform other duties as assigned by management.

Requirements

• Auto Body Repair and refinishing experience - 3+ years required
• Auto Body Collision and Damage Repairer (310B) Red Seal License (310Q) (Preferred but not a must) or in a registered apprenticeship program.
• Technicians with I-Car and OEM certifications are favorable.
• Must have I car Welding certification (elaborate on this)
• Must Have Vocational Certificate in Collision Repair
• Carrying, Lifting – 100 lbs, standing, sitting, walking, reaching)
• Valid Drivers license required
• Must have own tools, safety footwear.
• Up to date Compliance Training, such as AODA,WHMIS, Worker Health and safety Awareness and Workplace Violence and Harassment)and knowledge of Information Security PIPEDA
• 3 to 5 years of working Knowledge of Mitchell / Audatex
  

On-the-Job Exposure to the following elements:

• Fumes

• Dirt

• Chemicals/Toxins

• Hazards

• Heat/Cold

• Noise

Benefits

What we offer:

• Supplemental Pay: Bonus, Overtime Pay

• Benefits: Education reimbursement on related courses, safety tools and footwear can be provided, health, Long term Disability and life insurance
• Relocation assistance within Canada

Schedule:

• 8-hour shift, Monday to Friday, 8 am - 5 pm.

Career Path: As CSN Tilbury continues to grow, other career opportunities may become available.

Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and will evolve as CSN Tilbury continues to grow

CSN is an Equal Employment Opportunity employer. Qualified applicants will receive consideration for employment regardless of age, race, colour, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We strive to cultivate an inclusive, accessible environment, where all employees and customers feel valued, respected, and supported. We are dedicated to growing our corporate team in a way that reflects the diversity of our customers and communities in which we live and serve.

If you require an accommodation for the recruitment/interview process (including alternate formats of materials, or accessible meeting rooms or other accommodation), please let us know and we will work with you to meet your needs.

Disclaimer: CSN Collision Centres “CSN” does not accept resumes from employment placement agencies, head-hunters or recruitment suppliers that are not in a formal contractual arrangement with us. Our recruitment supplier arrangements are restricted to specific hiring needs and do not include this or other web-site job postings. Any resume or other information received from a supplier not approved by CSN to provide resumes to this posting or website will be considered unsolicited and will not be considered. CSN will not pay any referral, placement, or other fee for the supply of such unsolicited resumes or information.

Job Description

Salary: $75,000/yr - $0,000/yr

No. 1 Collision Group is excited to announce that we are currently accepting applications for the Glass Repair Technician position.

Here at No. 1, we prioritize creating an atmosphere that makes our employees feel both welcomed and valued. Our top priority is to create a team of individuals that is constantly growing and inspiring others around them to do the same. No matter the position, everyone here is ultimately working toward the same goal, which is to provide our clients with an unsurpassed collision repair experience.

While we understand that credentials are important, the number one thing we look for in potential candidates is work ethic and a positive mindset. These two things are important not only in the workplace; but also in life, as they set the tone for everything you do. These are the people we are looking to hire as a part of our team here at No. 1 Collision.

With that being said, please find a list below of some of the roles and responsibilities expected from someone in this position:

• 
  Complete rock chip repairs.
• 
  Installation of windshields and door glass.
• 
  Ensuring the cleanliness and organization of your station is maintained.
• 
  Consistently meet or exceed technical standards and ensure that the companys quality, safety, and other procedures are complied with.
• 
  Repair and Replace auto glass.
• 
  Insure the efficient use of materials.
• 
  Maintain adequate stock of glazing accessories on vehicle.
• 
  Perform the duties of the job always keeping safety in mind.
• 
  Maintain a spirit of cooperation, respect, and teamwork.
• 
  Always treat all customers with respect.
• 
  Always treat all fellow employees with respect.
• 
  Keep company vehicle and equipment properly serviced, clean, and in good working order and condition.
• 
  Other duties as assigned.

Below is also a list of skills/qualifications that would also be helpful for this position:

• 
  Glass ticket
• Ability to multi-task in a fast-paced work environment
• 
  Strong organizational skills and detail oriented
• 
  3+ years experience of Auto Glass Repair
• 
  Working knowledge of computers

No. 1 Collision Group and MercedesBenz Collision Richmond will always provide the best for our people, as we value them and the commitment they make to the growth of this organization. To demonstrate our appreciation towards our people, we provide a high-quality working environment, filled with amenities and unrivaled benefits to care for our people and their families.

To illustrate our dedication to our team, some of the benefits we provide are:

• Competitive Wages with optional Group Registered Retirement Saving Plans (RRSP) & Deferred Profit-Sharing Plan
• Company Sponsored Benefits Plan (Extended Health Care, Dental, Vision, and 1000 per year for Acupuncturist, Chiropractor, Massage Practitioner, Physiotherapist, and more)
• Company Sponsored Opportunities to Travel Abroad for Training
• Company Sponsored Education, and Opportunities for Growth
• State-of-the-Art Facility with Ergonomic Workstations
• Employee Reward Programs & Annual Safety Shoes Reimbursement & Employee Referral Bonus
• Company Sponsored Recreational Event(s)
• Free No.1 Collision and/or Mercedes-Benz Collision Apparel(s)
• Company Lunch(s) (at least once a month)
• Free Coffee (from Starbucks & Tim Hortons) and Tea with fresh cream

For a quick virtual tour of our facility and for more information about us; please click the following link:

If you are interested in a career with us, please do not hesitate to apply online. For more information about our open position(s), please visit us at:

Thank you for taking your time to review our job posting and to apply for this position. Candidates chosen to advance to the next step of our recruitment process will be contacted via phone or email.

Please note that internal applicants may be given first consideration.

Job Description

Come and join our growing team at Atomic Auto Repair!

Job Title: Automotive Mechanic
Company: Atomic Auto Repair
Location: Saskatoon, Saskatchewan
Job Type: Full-Time (8-hour shifts)

About Atomic Auto Repair

Atomic Auto Repair is a trusted, locally owned automotive shop serving Saskatoon and the surrounding area. We pride ourselves on providing honest, reliable service and quality repairs on a wide range of vehicles. As our team continues to grow, we’re looking for an experienced and dependable Automotive Mechanic to join us full-time.

Position Overview

We are seeking a skilled Automotive Mechanic with 2+ years of hands-on experience or journeyperson-level qualifications. This full-time role involves 8-hour shifts, Monday through Friday, and is ideal for individuals who take pride in their work and enjoy solving problems in a team-oriented environment.

Key Responsibilities

• Diagnose and repair mechanical, electrical, and electronic systems in a variety of vehicle makes and models
• Perform routine maintenance including oil changes, brake work, tire services, and inspections
• Use diagnostic tools to identify issues efficiently and accurately
• Communicate clearly with coworkers and service advisors regarding repair timelines and recommendations
• Maintain a clean and safe workspace
• Test drive vehicles to confirm repairs and ensure quality service

Requirements

• Minimum 2 years of automotive repair experience (Journeyperson certification is an asset)
• Must hold a valid driver’s license
• Must supply own tools
• Strong diagnostic and problem-solving skills
• Ability to work both independently and as part of a team
• Reliable, punctual, and detail-oriented

What We Offer

• Competitive wages based on experience and qualifications
• Employee Pricing on Products and Services
• Comprehensive health and wellness benefits , including:
• Dental care
• Disability insurance
• Employee assistance program (EAP)
• Extended health care
• Life insurance
• On-site parking
• Paid time off (PTO)
• Wellness program

How to Apply

If you're ready to join a supportive, professional team and work in a well-equipped, fast-paced shop, we want to hear from you!

Submit your resume
Or apply in person at: Atomic Auto Repair – 225 Ave. B North, Saskatoon, SK

Job Description

About CSN Collision

CSN Collision safely repairs more than 200,000 vehicles a year helping Canadians get back on the road with the trust and comfort of knowing their vehicle has been returned to like new condition. Since 2002, CSN has grown to become the leader in collision repair with 400+ collision repair Centres across Canada, USA and Italy.

Position Summary:

CSN Collision is looking for an Auto Body Technician to join our team. Our Auto Body Technician must be able to take a vehicle in a damaged state and repair or restore damaged vehicles to their original structural integrity, function, and appearance. The Incumbent is detailed oriented and can multitask to accommodate shifting priorities.

Primary Objectives of the AutoBody (Collision Repair) Technician:

• Review damage report and estimates of repair cost and plan work to be performed
• Thoroughly examine collision damage (Review the complete vehicle exterior body parts, check all power accessories (door locks/windows/mirrors are operational) check that the dash panel has no warning lights on. Identify any prior damages overlooked on the QA checklist/ or related on the supplemental damage sheet.)
• Performing structural and complete body repairs : Repair and replace front end components, body components, doors and frame and underbody components. (Assess, Repair or Replace interior and exterior parts, electrical components, and vehicle accessories, doors and frame and underbody components)
• Straighten bent frames using frame and underbody pulling and anchoring equipment, Hammer out dents, buckles and other defects using blocks and hammers.
• Welding on vehicles with the use of MIG welders and compression spot welders.
• Fully dismantle the complete vehicle damaged areas including the blend panel parts in order to identify all hidden damages as early in the repair cycle as possible. For example remove damaged fenders, panels and grills using wrenches and cutting torch and bolt or weld replacement parts into place, repair or replace damaged windows, windshields and sunroof
• Ability to file, grind and sand repaired surfaces, using power tools and hand tools
• Mask and tape auto body surfaces in preparation for painting, apply primers and repaint surfaces.
• Operate soldering equipment or use plastic filler to fill holes, dents and seams
• Restore vehicle to factory specification (Return the vehicle back to factory/OEM specifications)
• Inspect repaired vehicles and test drive vehicles for proper handling
• Technician must be able to read and understand the estimates.
• Capable of reading and comprehending automotive repair procedures.
• Able to work with a variety of metals and plastics, as well as glass, electrical, and mechanical parts.
• Experience using frame and measuring equipment.
• Experience with disassembly and reassembly of vehicles
• Perform other duties as assigned by management.

Requirements

• Auto Body Repair and refinishing experience - 3+ years required
• Auto Body Collision and Damage Repairer (310B) Red Seal License (310Q) (Preferred but not a must) or in a registered apprenticeship program.
• Technicians with I-Car and OEM certifications are favorable.
• I car Welding certification
• Carrying, Lifting – 100 lbs, standing, sitting, walking, reaching)
• Valid driver's license required
• Must have own tools, safety footwear.
• Up-to-date Compliance Training, such as AODA,WHMIS, Worker Health and safety Awareness and Workplace Violence and Harassment)and knowledge of Information Security PIPEDA
• 3 to 5 years of working Knowledge of Mitchell / Audatex

Benefits

What we offer:

• Supplemental Pay: Bonus
• Benefits: Health, dental, vision
• Paid time off

Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and will evolve as CSN continues to grow

CSN is an Equal Employment Opportunity employer. Qualified applicants will receive consideration for employment regardless of age, race, colour, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We strive to cultivate an inclusive, accessible environment, where all employees and customers feel valued, respected, and supported. We are dedicated to growing our corporate team in a way that reflects the diversity of our customers and communities in which we live and serve.

If you require an accommodation for the recruitment/interview process (including alternate formats of materials, or accessible meeting rooms or other accommodation), please let us know and we will work with you to meet your needs.

At CSN Collision, we’re always looking for passionate, skilled, and dedicated individuals who take pride in their work and want to be part of a collaborative and high-performing team. This posting is part of our ongoing efforts to proactively build a pipeline of talented professionals for future opportunities. If your background and experience align with what we’re looking for, a member of our team will reach out when a suitable opportunity arises.

By applying, you’ll be joining our talent community, giving us the opportunity to connect with you when the timing is right. We appreciate your interest in CSN Collision and look forward to potentially working together in the future.